FRA1601G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 16.0 AMPS. Glass Passivated Fast Recovery Rectifiers

FRA1601G-FRA1607G
16.0AMP. Glass Passivated Fast Recovery Rectifiers
TO-220AC
Features
Glass passivated chip junction.
High efficiency, Low VF
High current capability
High reliability
High surge current capability
Low power loss
Mechanical Data
Cases: TO-220AC Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: Pure tin plated, Lead free.
Polarity: As marked
High temperature soldering guaranteed:
260 ^oC /10 seconds, 0.16”,(4.06mm) from
case.
Mounting position: Any
Weight: 2.24 grams
.113(2.87)
.103(2.62)
.412(10.5)
MAX
DIA
.154(3.91)
.148(3.74)
.27(6.86)
.23(5.84)
.594(15.1)
.587(14.9)
.185(4.70)
.175(4.44)
.055(1.40)
.045(1.14)
PIN1
2
.16(4.06)
.14(3.56)
.037(0.94)
.027(0.68)
.56(14.22)
.53(13.46)
.11(2.79)
.10(2.54)
.205(5.20)
.195(4.95)
PIN 1
PIN 2
.025(0.64)
.014(0.35)
CASE
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol ^{FRA FRA FRA FRA FRA FRA FRA} Units
1601G 1602G 1603G 1604G 1605G 1606G 1607G
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
See Fig. 1
V_DC
I_(AV)
50 100 200 400 600 800 1000 V
16.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
I_FSM
250
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage
@ 16.0A
V_F
Maximum DC Reverse Current @ TC=25 ^oC
at Rated DC Blocking Voltage @ TC=125 ^oC
I_R
Maximum Reverse Recovery Time ( Note 1) Trr
1.3
V
5.0
uA
100
uA
150
250
500
nS
Typical Junction Capacitance ( Note 3 )
Cj
70
pF
Typical Thermal resistance ( Note 2 )
R_θJC
2.5
Operating and Storage Temperature Range TJ ,TSTG
-65 to +150
Notes:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Thermal Resistance from Junction to Case Per Leg Mounted on Heatsink
Size 2” x 3” x 0.25” Al-Plate.
3. Measured at 1MHz and Applied Reverse Voltage of 4.0 Volts D.C.
o_C/W
o_C
http://www.luguang.cn
mail:[e-mail]