DBL201G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers

DBL201G - DBL209G
Single Phase2.0 AMP. Glass Passivated Bridge Rectifiers
DBL
Features
— Glass passivated junction
— Ideal for printed circuit board
— Reliable low cost construction utilizing
molded plastic technique
— High surge current capability
— High temperature soldering guaranteed:
260^oC / 10 seconds at 5 lbs., ( 2.3 kg )
tension
— Small size, simple installation
DBLS
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol
DBL DBL DBL DBL DBL DBL DBL DBL DBL
201G 202G 203G 204G 205G 206G 207G 208G 209G
DBLS DBLS DBLS DBLS DBLS DBLS DBLS DBLS DBLS
201G 202G 203G 204G 205G 206G 207G 208G 209G
Units
Maximum Recurrent Peak Reverse
Voltage
V_RRM ^{50 100 200 400 600 800 1000 1200 1400} V
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current @T_A = 40 ^oC
Peak Forward Surge Current, 8.3 ms
Single Half Sine-wave Superimposed on
Rated Load (JEDEC method )
V_RMS ^{35 70 140 280 420 560 700 840 980} V
V_DC ^{50 100 200 400 600 800 1000 1200 1400} V
I_(AV)
2.0
A
I_FSM
50
A
Maximum Instantaneous Forward Voltage
@ 2.0A
V_F
1.15
1.30 V
Maximum DC Reverse Current
@T_A=25 ^oC at Rated DC Blocking Voltage
@ T_A=125 ^oC
Typical Thermal Resistance (Note)
I_R
R_θJA
R_θJL
10
uA
500
uA
40
o_{C /W}
15
Operating Temperature Range
T_J
-55 to +150
o_C
Storage Temperature Range
T_STG
-55 to +150
o_C
Note: Thermal resistance from Junction to Ambient and from Junction to Lead Mounted on
P.C.B. with 0.51 x 0.51” (13 x 13mm) Coper Pads.
http://www.luguang.cn
mail:[e-mail]