DBL151G Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – Single Phase 1.5 AMPS. Glass Passivated Bridge Rectifiers

DBL(S)151G - DBL(S)159G
Single Phase 1.5 AMP. Glass Passivated Bridge Rectifiers
DBL
Features
Glass passivated junction
Ideal for printed circuit board
Reliable low cost construction utilizing molded
plastic technique
High surge current capability
High temperature soldering guaranteed:
260 ^oC / 10 seconds at 5 lbs., ( 2.3 kg )
tension
Small size, simple installation
DBLS
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
DBL DBL DBL DBL DBL DBL DBL DBL DBL _Units
Symbol ^{151G 152G 153G 154G 155G 156G 157G 158G 159G}
DBLS DBLS DBLS DBLS DBLS DBLS DBLS DBLS DBLS
151G 152G 153G 154G 155G 156G 157G 158G 159G
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 1200 1400 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 840 980 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
@TA = 40 ^oC
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
V_DC
I_(AV)
I_FSM
50 100 200 400 600 800 1000 1200 1400 V
1.5
A
50
A
Maximum Instantaneous Forward Voltage
@ 1.5A
V_F
1.1
1.25
V
Maximum DC Reverse Current
@ TA=25 ^oC at Rated DC Blocking Voltage
I_R
5
@ TA=125 ^oC
500
Typical Thermal Resistance (Note)
R_θJA
40
R_θJL
15
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
Note: Thermal resistance from Junction to Ambient and from Junction to Lead Mounted on
P.C.B. with 0.4” x 0.4”” (10mm x 10mm) Copper Pads.
uA
uA
o_C/W
o_C
o_C
http://www.luguang.cn
mail:[e-mail]