DBL101G Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Single Phase 1.0 AMP Glass Passivated Bridge Rectifiers

DBL(S)101G - DBL(S)107G
Single Phase 1.0 AMP. Glass Passivated Bridge Rectifiers
DBL
.255(6.5) .315(8.0)
.245(6.2) .285(7.24)
Features
Glass passivated junction
Ideal for printed circuit board
Reliable low cost construction utilizing molded
plastic technique
High temperature soldering guaranteed:
260 ^oC / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
Small size, simple installation
High surge current capability
.102(2.60)
.094(2.40)
.335(8.51)
.320(8.21)
.082(.03)
.05(12.7)
.045(1.41)
.035(0.98)
.023(0.58) ^.205(52.)
.018(04.6) ^.195(5.0)
.1854(.69)
.150(3.81)
.350(89.)
.3007(.6)
.075(19.0)
.013(0.33)
.055(1.93)
.0088(02.2)
DBLS
.205(5.2)
.195(5.0)
.047(12.0)
.040(1.20)
.335(8.51)
.320(8.13)45⁰
.013(0.33)
.0088(02.2)
.404(10.3)
.386(9.80)
.255(6.5)
.245(6.2)
.102(2.60)
.094(2.40) _.060(15.3)
.013(0.33)
.040(1.20)
.003(0.706)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
DBL DBL DBL DBL DBL DBL DBL
Symbol ^{101G 102G 103G 104G 105G 106G 107G} Units
DBLS DBLS DBLS DBLS DBLS DBLS DBLS
101G 102G 103G 104G 105G 106G 107G
Maximum Recurrent Peak Reverse Voltage V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
@TA = 40 ^oC
I_(AV)
1.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load I_FSM
50
A
(JEDEC method )
Maximum Instantaneous Forward Voltage
@ 1.0A
V_F
Maximum DC Reverse Current @ TA=25 ^oC
at Rated DC Blocking Voltage @ TA=125 ^oC
I_R
Typical Junction Capacitance
Cj
1.1
V
10
uA
500
uA
25
pF
Typical Thermal resistance (Note 1)
R_θJA
40
R_θJL
15
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
Notes:
1. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted
On P.C.B. with 0.2” x 0.2”” (5 x 5mm) Copper Pads.
2. DBLS for Surface Mount Package.
o_C/W
o_C
o_C
http://www.luguang.cn
mail:[e-mail]