CRB1.0M Datasheet, PDF (1/2 Pages) Shenzhen Luguang Electronic Technology Co., Ltd – Ceramic Resonator

CRB1.0M
Ceramic Resonator
1. SCOPE
This specification shall cover the characteristics of the ceramic resonator with
1.20MHz
2. SPECIFICATION NO.
: DL021
3. PART
NO.
: CRB1.0M
4. ELECTRICAL SPECIFICATION
4.1 Oscillation Frequency (Fosc)
: 1000±5KHz
4.2 Resonant Impedance(Ro)
: 50Ω max.
4.3 Capacitance (Co)
: 75PF±20%
4.4 Temperature Characteristics
of Oscillation Frequency
: ±0.3%max. (-20℃to+80℃)
4.5 Rated Voltage
: 50 VDC max.
4.6 Maximum Input Voltage
: 15 Vp-p
4.7 Insulation Resistance
: 1000MΩ min.
5. Environmental Specification :
5.1 Lead Pull
: 1KG load Terminal Direction Min.
5.2 Vibration
: 600-3300rpm.1.5mm.x.y＆.z axes.1H Each Min.
5.3 Shock
: Random Drop,30cm High Concrete Floor
5.4 Solderability
: Dipping Terminals Into Molten Solder at
230±5℃ At 5±0.5 Sec.
5.5 Resistance to
Soldering Heat
: Dipping Lead Terminals No Close Than 2mm
From the Sn 350 ± 10℃ 3 Sec.
After 1H to Test.
5.6 Heat Resistance
: Keep In 40±2℃ Temp 90%Humidity For 100H
After 1H To Test.
5.7 Operation Tempeature : -20℃to+80℃
5.8 Storage Temperature
: -40℃to+85℃
5.9 Aging Rate
:Fosc ±0.5%max.
SHENZHEN LUGUANG ELECTRONIC TECHNOLOGY CO.,LTD.