|
CDBC455C28 Datasheet, PDF (1/3 Pages) Shenzhen Luguang Electronic Technology Co., Ltd – Ceramic Discriminator | |||
|
CDBC455C28
Ceramic Discriminator
1. SCOPE
This specification shall be applied to ceramic discriminator for quadrature detection
with communication IC.
2. PART NO.
: CDBC455C28
3.OUTLINE DRAWING AND DIMENSIONS
3.1 Appearance :no visible damage and dirt.
3.2 Dimensions :see Figure 1.
3.3 Construction :to be packaged in synthetic resin and shield with resin the
bottom.
4.ELECTRICAL CHARACTERISTICS(0â to +40â)
4.1 Lest Method
4.1.1 Input Signal Condition :80dBμ
4.1.2 Frequency Deviation :±4.0KHz
4.1.3 Modulation Frequency :1.0KHz
4.2 Characteristics
Item
Requirements
4-2-1 Recovered Audio 3dB Bandwidth(from 455KHz)
±4.0KHz min.
4-2-2 Recovered Audio Output Voltage(at 455KHz)
40±20mV
4-2-3 Distortion(at 455KHz)
3.0% max.
4-2-4 Withstanding Voltage
50V D.C. for 1 minute
5.ABSOLUTE MAXIMUM RATINGS
Item
Requirements
5-1 Withstanding Voltage
50V D.C. for 1 minute
5-2 Insulation Resistance
100MΩ min. at
D.C.100V
5-3 Input Signal Level
5dBm (50Ω Termination)
5-4 Operating Temperature Range
-20â to +80â
5-5 Storage Temperature Range
-40â to +85â
6. PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
6.1 Vibration
Discriminator shall be measured after being applied vibration of amplitude to
1.5mm with 600 to 3,300 r.p.m band of vibration frequency to each of 3 perpendicular
direction for 24 hours. The measured values shall meet Table 1.
6.2 Random Drop
Discriminator shall be measured after 3 times random dropping from the height of
30cm on concrete floor. The measured values shall meet Table 1.
6.3 Temperature Characteristics
Discriminator shall be measured within -20â to +80â temperature range. The
measured values shall meet Table 1.
SHENZHEN LUGUANG ELECTRONIC TECHNOLOGY CO.,LTD.
|
▷ |