BZW04P5V8 Datasheet, PDF (1/4 Pages) MDE Semiconductor, Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

BZW04P-5V8--BZW04-376
Transient Voltage Suppressor
BREAKDOWN VOLTAGE: 5.8 --- 376 V
PEAK PULSE POWER: 400 W
Features
Plastic package has underwriters laboratory
flam m ability clas sification 94V-0
Glass passivated junction
400W peak pulse power capability with a 10/1000μs
waveform , repetition rate (duty cycle): 0.01%
Excellent clam ping capability
Fas t res pons e tim e: typically less than 1.0ps from 0 Volts to
V(BR) for uni-directional and 5.0ns for bi-directional types
Devices with V(BR) 10V ID are typically ID les s than 1.0 μA
High temperature soldering guaranteed:265 / 10 seconds,
0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension
DO-41
Mechanical Data
Cas e:JEDEC DO--41, m olded plas tic body over
passivated junction
Term inals: axial leads, solderable per MIL-STD-750,
m ethod 2026
Polarity: foruni-directional types the color band denotes
the cathode, which is postitive with respect to the
anode under normal TVS operation
Weight: 0.012 ounces, 0.34 gram s
Mounting position: any
Dimensions in millimeters
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional us e add suffix letter "B" (e.g. BZW04P-6V4B).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ambient tem perature unless otherwise specified.
SYMBOL
VALUE
Peak pow er dissipation w ith a 10/1000μs w aveform (NOTE 1, FIG.1)
PPPM
Minimum 400
Peak pulse current w ith a 10/1000μs w aveform (NOTE 1)
IPPM
See table 1
Steady state pow er dissipation at TL=75
fffffLead lengths 0.375"(9.5mm) (NOTE 2)
PM(AV)
1.0
Peak forw ard surge current, 8.3ms single half
f f f f Sine-wave superimposed on rated load (JEDEC Method) (NOTE 3)
IFSM
40.0
Maximum instantaneous forw ard voltage at 25A for unidirectional only (NOTE 4)
VF
3.5/6.5
Operating junction and storage temperature range
TJ, TSTG
-50---+175
NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2
(2) Mounted on copper pad area of 1.6" x 1.6"(40 x40mm²) per Fig. 5
(3) Measured of 8.3ms single half sine-w ave or equare w ave, duty cycle=4 pulses per minute maximum
(4) VF=3.5 Volt max. for devices of V(BR) 220V, and VF=5.0 Volt max. for devices of V(BR) >220V
UNIT
W
A
W
A
V
http://www.luguang.cn
mail:[e-mail]