5.0SMDJ11A Datasheet, PDF (1/3 Pages) MDE Semiconductor, Inc. – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

5.0SMDJ Series
Rating and Characteristic Curves 5.0SMDJ Series
VOLTAGE-5.0 TO 170 Volts
5000 Watt Peak Pulse Power
Features
For surface mounted applications in order to
optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Excellent clamping capability
Repetition rate (duty cycle):0.01%
Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
Typical IR less than 1µA above 10V
High temperature soldering:
250°C/10 seconds at terminals
Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
Mechanical Data
Case: JEDEC DO214AB. Molded plastic over glass
passivated junction
Polarity: Color band denoted positive end (cathode)
except Bidirectional
Weight: 0.021 grams
SMC/DO-214AB
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1, 2, Fig.1)
P_PPM
Minimum 5000
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)
I_PPM
SEE TABLE 1
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note2, 3)
I_FSM
400
Operatings and Storage Temperature Range
NOTES:
T_J, T_STG
-55 +150
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS
Watts
Amps
Amps
°C
http://www.luguang.cn
mail:[e-mail]