1N4933 Datasheet, PDF (1/2 Pages) Motorola, Inc – FAST RECOVERY RECTIFIERS 50-600 VOLTS 1.0 AMPERE

1N4933-1N4937
Fast Recovery Rectifier
DO-41
Features
Low cost construction
Fast switching for high efficency.
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260^oC/10 seconds/0.375 (9.5mm)lead length
at 5 lbs (2,3kg) tension
Mechanical Data
Case:Transfer molded plastic
Polarity:Color band denotes cathode end
Mounting position:Any
Weight:0.012 ounce,0.33 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase,half wave,60Hz,resistive or inductive load.
For capacitive load derate current by 20%.
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
0.375 (9.5mm) lead length at TA=75 ^oC
SYMBOLS IN4933 IN4934 IN4935 IN4936 IN4937 UNITS
VRRM
VRMS
VDC
50 100
35 70
50 100
200
140
200
400
280
400
600
420
600
Volts
Volts
Volts
I ( AV )
1.0
Amp
Peak Forward Surge Current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 1.0A VF
Maximum DC Reverse Current
at rated DC blocking voltage
TA=25 ^oC
TA=100 ^oC
IR
30
Amps
1.2
Volts
5.0
Amps
100
Maximum Reverse Rec very Time(NOTE3)
Tj=25 ^oC
trr
200
Maximum Reverse Recovery Current(NOTE 3)
IRM(REC)
2.0
Typical Junction Capacitance(NOTE1)
CJ
15
Typical Thermal Resistance(NOTE2)
R JA
50
Operating and Storage Temperature Range
TJ,TSTG
-65 to +150
NOTES:
1.Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2.Thermal Resistance from Junction to Ambient at 0.375 (9.5mm) lead length,P.C.board mounted.
3.Reverse Recovery Test Conditions:IF=1.0A,VR=30V,di/dt=50A/ s,Irr=10% IRM for measurement of trr.
nS
Amps
pF
O_C/W
O_C
http://www.luguang.cn
mail:[e-mail]