15KPA17A Datasheet, PDF (1/2 Pages) MDE Semiconductor, Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

15KPA SERIES
Glass Passivated Junction TVS
STAND-OFF VOLTAGE-17 TO 280 Volts
15000 Watt Peak Pulse Power
Features
— ^{Plastic package}
— Glass passivated junction
— _{15000W peak pulse power capability on 10/1000us}
waveform
— Excellent clamping capability
— Repetition rate(duty cycle) : 0.05%
— Low incremental surge resistance
— Fast response time: typically less than 1.0ps from 0 Volts to BV,
Bidirectonal less than 10 ns
— High temperature soldering guaranteed: 265°C/10 seconds/.375",
(9.5mm) lead length,51bs.(2.3kg) tension
0.360 (9.1)
0.340 (8.6)
DIA.
P600
1.0 (25.4)
MIN.
0.360 (9.1)
0.340 (8.6)
Mechanical Data
— _{Case: Molded plastic over glass passivated junction}
— Terminal: Plated Axial leads, solderable per MIL-STD-750
, Method 2026
— Polarity: Color band denotes positive end (cathode)
except Bipolar
— Mounting Position: Any
— Weight: 0.07 ounce, 2.5 grams
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATION
For Bidirectional use C or CA Suffix for types 15KPA17 thru types 15KPA280 (e.g. 15KPA17C , 15KPA280CA)
Electrical characteristics apply in both directions
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation on 10/1000s waveform (Note 1,FIG.1)
Peak Pulse Current of on 10/1000s waveform (Note 1,FIG.3)
Steady State Power Dissipation at T_L = 75 , Lead lengths.375",(9.5mm) (Note
2)
Peak Forward Surge Current,1/20 second / 25 (JEDEC Method)
Operating junction and Storage Temperature Range
SYMBOL VALUE
P_PPM
Minimum
15000
I_PPM
SEE
TABLE 1
UNITS
Watts
Amps
P_M(AV)
8
Watts
I_FSM
T_J , T_STG
400
-55 to
+ 175
Amps
http://www.luguang.cn
mail:[e-mail]