|
PE4268_15 Datasheet, PDF (1/11 Pages) Lucky Light Electronic – Switch | |||
|
Product Description
The PE4268 SP6T RF UltraCMOS⢠Switch addresses the
specific design needs of the Quad-Band GSM Handset
Antenna Switch Module Market. Broadband performance also
makes it a versatile solution in other IF and RF applications.
The switch includes two high power paths with low insertion
loss and four low power paths with high isolation. On-chip
CMOS decode logic facilitates three-pin low voltage CMOS
control. High ESD tolerance of 1500 V at all ports and no
blocking capacitor requirements make this the ultimate in
integration and ruggedness.
The PE4268 UltraCMOS⢠RF Switch is manufactured in
Peregrineâs patented Ultra Thin Silicon (UTSi®) CMOS
process, offering the performance of GaAs with the economy
and integration of conventional CMOS.
Figure 1. Functional Diagram
Product Specification
PE4268
SP6T UltraCMOS⢠2.6 V Switch
100 â 3000 MHz
Features
⢠Three pin CMOS logic control with
integral decoder/driver
⢠Low TX insertion loss: 0.55 dB at 900
MHz, 0.7 dB at 1900 MHz
⢠TX â RX Isolation of 48 dB at 900 MHz,
40 dB at 1900 MHz
⢠Low harmonics: 2fo = -84 dBc and
3fo = -70 dBc at +35 dBm input power
⢠1500 V HBM ESD tolerance
⢠RX SAW over voltage protection circuit
⢠Harmonics immune to RX VSWR
⢠No blocking capacitors required
⢠20-lead 4x4 mm QFN package
TX1
TX2
CMOS
Control/Driver
and ESD
V1 V2 V3
Figure 2. Package Type
20-lead 4x4 mm QFN
RX1
RX2
RX3
RX4
Document No. 70-0165-03 â www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 11
|
▷ |