|
KWM-50581XY Datasheet, PDF (1/1 Pages) Lucky Light Electronic – 5 x 8 Dot Matrix (5.0mm Dot) Multi-Color LED Display | |||
|
DESCRIPTION:
The KWM-50581XY series is 60.60mm (2.39") height 5 x 8 multi-color dot
matrix display.
This multi-color series is suitable for use in single/multi-line message display,
large area graphics display and electronic games.
All devices are available as either common row anode or common row cathode.
ABSOLUTE MAXIMUM RATINGS: (Ta=25oC)
Parameter
Max
Reverse Voltage per segment
5V
Reverse Current per segment (Vr = 5V)
100µA
Derating Linear from 25oC per segment
0.4mA/ oC
Operating Temperature Range
-40oC To 85oC
Storage Temperature Range
-40oC To 100oC
Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC
NOTES : 1. All dimensions are in millimeters (inches).
2. Tolerance is +0.25mm(0.010) unless otherwise specified.
3. Specifications are subject to change without notice.
4. NP: No Pin.
5. NC: No Connect.
TESTING CONDITION FOR EACH PARAMETER :
Parameter
Symbol Unit Test Condition
Forward Voltage
Vf
V
If=20mA
Peak Emission Wave Length
λÏ
nm
If=20mA
Spectral Line Half-Width
âλ
nm
If=20mA
Reverse Current
Ir
µA
Vr=5V
Average Luminous Intensity
Iv
µ cd
If=10mA
KWM-50581XY SERIES
5 x 8 Dot Matrix (5.0mm Dot)
Multi-Color
LED Display
PACKAGE DIMENSIONS
COL 1 2 3 4 5
1
2
3
4
5
PIN1
6
7
7.62*4=30.48(1.200)
37.80(1.488)
Ï5.0(0.197)
8
ROW
8.80(0.346)
2.54*8=20.32
6.30(0.248)
Ï0.5(0.020)
45.72(1.800)
INTERNAL CIRCUIT DIAGRAM
ROW CATHODE
COL 1 2 3 4 5
PIN
NO.
1
18
2
3
13 4
12 7
10 11
ROW
PIN
NO.
1 16
2 15
3 17
4 14
58
65
76
89
GREEN
RED
ROW ANODE
COL 1 2 3 4 5
PIN
NO.
1
18
2
3
13 4
12 7
10 11
ROW
PIN
NO.
1 16
2 15
3 17
4 14
58
65
76
89
GREEN
RED
PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25oC AMBIENT)
Part No.
Chip
Raw
Material
Emitted
Color
Wave Absolute Maximum Ratings Electro-optical Characteristic
C.C
or
Length âλ Pd If
If
Vf (V)
If Iv (µcd)
C.A
(Peak) Per Dot (Rec) Per Dot
Î»Ï (nm) (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ.
GaAsP/GaP Hi-Eff Red
635
KWM-50581A32
GaP
Green
565
GaAlAs Super Red Common 660
KWM-50581ASG
GaP
Super Green Anode
570
45 100 50 100 1.7 1.9 2.6 10-20 900 1800
30 100 50 100 1.7 2.2 2.6 10-20 800 1700
20 100 50 100 1.5 1.9 2.6 10-20 1600 3000
30 100 50 100 1.7 2.2 2.6 10-20 850 1850
GaAsP/GaP
KWM-50581A26
GaP
Yellow
Green
585 30 100 50 100 1.7 1.9 2.6 10-20 800 1700
565 30 100 50 100 1.7 2.2 2.6 10-20 800 1700
GaAsP/GaP Hi-Eff Red
635
KWM-50581C32
GaP
Green
565
GaAlAs Super Red Common 660
KWM-50581CSG
GaP Super Green Cathode 570
45 100 50 100 1.7 1.9 2.6 10-20 900 1800
30 100 50 100 1.7 2.2 2.6 10-20 800 1700
20 100 50 100 1.5 1.9 2.6 10-20 1600 3000
30 100 50 100 1.7 2.2 2.6 10-20 850 1850
GaAsP/GaP
KWM-50581C26
GaP
Yellow
Green
585 30 100 50 100 1.7 1.9 2.6 10-20 800 1700
565 30 100 50 100 1.7 2.2 2.6 10-20 800 1700
REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments.
2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve.
3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).
|