KWL-701UX Datasheet, PDF (1/1 Pages) Lucky Light Electronic – Light Bar Graph Array Display

KWL-701Ux SERIES
Light Bar
Graph Array Display
DESCRIPTION:
The KWL-701Ux series is 11.00mm x 34.50mm seven-element bar graph
display.
The device has separete anode and cathode for each light segment and is
available in 6 different colors.
ABSOLUTE MAXIMUM RATINGS: (Ta=25^oC)
Parameter
Max
Reverse Voltage per segment
5V
Reverse Current per segment (Vr = 5V)
100µA
Derating Linear from 25^oC per segment
0.4mA/ ^oC
Operating Temperature Range
-40^oC To 85^oC
Storage Temperature Range
-40^oC To 100^oC
Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260^oC
NOTES : 1. All dimensions are in millimeters (inches).
2. Tolerance is +0.25mm(0.010) unless otherwise specified.
3. Specifications are subject to change without notice.
4. NP: No Pin.
5. NC: No Connect.
TESTING CONDITION FOR EACH PARAMETER :
Parameter
Symbol Unit Test Condition
Forward Voltage
Vf
V
If=20mA
Peak Emission Wave Length
λρ
nm
If=20mA
Spectral Line Half-Width
∆λ
nm
If=20mA
Reverse Current
Ir
µA
Vr=5V
Average Luminous Intensity
Iv
µ cd
If=10mA
PACKAGE DIMENSIONS
PIN 1
A
B
C
D
E
F
G
9.0(0.354)
7.0(0.276)
11.0(0.433)
φ0.50(0.02)
7.62(0.3)
2.54*6=15.24(0.6)
INTERNAL CIRCUIT DIAGRAM
14
13
12
11
10
9
8
A
B
C
D
E
F
G
1
2
3
4
5
6
7
PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25^oC AMBIENT)
Part No.
Chip
Raw
Material
Emitted
Color
Wave ^{Absolute Maximum Ratings Electro-optical Characteristic}
C.C
or
Length ^{∆λ Pd If}
If
Vf (V)
If Iv (µcd)
C.A
(Peak) Per Chip (Rec) Per Chip
λρ (nm) _{(nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ.}
KWL-701U5
GaP
Bright Red
700 90 100 50 100 1.7 2.4 2.8 10-20 300 550
KWL-701U3 _{GaAsP/GaP Hi-Eff. Red}
635
No
KWL-701US _GaAlAs
Super Red
660
Common
KWL-701U2
GaP
Green
565
Polar
KWL-701UG
GaP
Super Green
570
45 100 50 100 1.7 1.9 2.6 10-20 700 1800
20 100 50 100 1.5 1.9 2.6 10-20 1500 5000
30 100 50 100 1.7 2.2 2.6 10-20 700 1600
30 100 50 100 1.7 2.2 2.6 10-20 850 1900
KWL-701U6 _GaAsP/GaP
Yellow
585 30 100 50 100 1.7 1.9 2.6 10-20 600 1500
REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments.
2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve.
3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).