KWA-501 Datasheet, PDF (1/1 Pages) Lucky Light Electronic – Alphanumeric LED Display Single Digit (0.50)

KWA-501 SERIES
Alphanumeric LED Display
Single Digit (0.50")
DESCRIPTION:
The KWA-501 series is 0.50 inch (12.70mm) height 16-segment single digit
alphanumeric displays with the right DP.
This series is suitable for use in instrument panels, digital readout displays.
All devices are available as either common anode or common cathode.
PACKAGE DIMENSIONS
8.20
10^o
1.20
PIN 1.
ABSOLUTE MAXIMUM RATINGS: (Ta=25^oC)
Parameter
Max
Reverse Voltage per segment
5V
Reverse Current per segment (Vr = 5V)
100µA
Derating Linear from 25^oC per segment
0.4mA/ ^oC
Operating Temperature Range
-40^oC To 85^oC
Storage Temperature Range
-40^oC To 100^oC
Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260^oC
NOTES : 1. All dimensions are in millimeters (inches).
2. Tolerance is +0.25mm(0.010) unless otherwise specified.
3. Specifications are subject to change without notice.
4. NP: No Pin.
5. NC: No Connect.
16.00
φ 0.50
12.70
INTERNAL CIRCUIT DIAGRAM
11
A1 A2
F HJK B
G1 G2
E NML C
D1 D2 DP
2.54*8=20.32
11
TESTING CONDITION FOR EACH PARAMETER :
Parameter
Symbol Unit Test Condition
Forward Voltage
Vf
V
If=20mA
Peak Emission Wave Length
λρ
nm
If=20mA
Spectral Line Half-Width
∆λ
nm
If=20mA
Reverse Current
Ir
µA
Vr=5V
Average Luminous Intensity
Iv
µ cd
If=10mA
A1 A2 B C D1 D2 E F G1 G2 H J K L M N DP A1 A2 B C D1 D2 E F G1 G2 H J K L M N DP
1 18 16 13 9 10 8 4 5 15 3 2 17 14 6 7 12
1 18 16 13 9 10 8 4 5 15 3 2 17 14 6 7 12
PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25^oC AMBIENT)
Part No.
KWA-501A3
KWA-501AS
KWA-501A2
KWA-501AG
KWA-501A6
KWA-501C3
KWA-501CS
KWA-501C2
KWA-501CG
KWA-501C6
Chip
Raw
Material
Emitted
Color
Wave ^{Absolute Maximum Ratings}
Electro-optical Data(at 10mA)
C.C
or
Length ^{∆λ Pd If}
If
Vf (V)
If Iv (µcd)
C.A
(Peak) Per Segment (Rec) Per Segment
λρ (nm) _{(nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ.}
GaAsP/GaP Hi-Eff. Red
635 45 100 50 100 1.7 1.9 2.6 10-20 750 2000
GaAlAs
GaP
GaP
Super Red
660
Green
Common
565
Anode
Super Green
570
20 100 50 100 1.5 1.9 2.6 10-20 5600 21000
30 100 50 100 1.7 2.2 2.6 10-20 750 2000
30 100 50 100 1.7 2.2 2.6 10-20 850 2200
GaAsP/GaP Yellow
585 30 100 50 100 1.7 1.9 2.6 10-20 700 1600
GaAsP/GaP Hi-Eff Red
635 45 100 50 100 1.7 1.9 2.6 10-20 750 2000
GaAlAs
GaP
GaP
Super Red
660
Common
Green
565
Cathode
Super Green
570
20 100 50 100 1.5 1.9 2.6 10-20 5600 21000
30 100 50 100 1.7 2.2 2.6 10-20 750 2000
30 100 50 100 1.7 2.2 2.6 10-20 850 2200
GaAsP/GaP Yellow
585 30 100 50 100 1.7 1.9 2.6 10-20 700 1600
REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments.
2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve.
3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).