KW1-2302 Datasheet, PDF (1/1 Pages) Lucky Light Electronic – LED Numeric Display Single Digit (2.30)

KW1-2302 SERIES
LED Numeric Display
Single Digit (2.30")
DESCRIPTION:
PACKAGE DIMENSIONS
The KW1-2302 series is large single digit display in 2.30 inch (56.80mm) height
with right DP designed for accurate readable displays need to be viewed over
31.90
a distance.
This series is suitable for use in instruments, digital readout displays.
10.0^o
5.50
All devices are available as either common anode or common cathode.
A
F
G
B
ABSOLUTE MAXIMUM RATINGS: (Ta=25^oC)
Parameter
Max
Reverse Voltage per segment
5V
Reverse Current per segment (Vr = 5V)
100µA
Derating Linear from 25^oC per segment
0.4mA/ ^oC
Operating Temperature Range
-40^oC To 85^oC
Storage Temperature Range
-40^oC To 100^oC
Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260^oC
NOTES : 1. All dimensions are in millimeters (inches).
2. Tolerance is +0.25mm(0.010) unless otherwise specified.
3. Specifications are subject to change without notice.
4. NP: No Pin.
5. NC: No Connect.
TESTING CONDITION FOR EACH PARAMETER :
Parameter
Symbol Unit Test Condition
Forward Voltage
Vf
V
If=20mA
Peak Emission Wave Length
λρ
nm
If=20mA
Spectral Line Half-Width
∆λ
nm
If=20mA
Reverse Current
Ir
µA
Vr=5V
Average Luminous Intensity
Iv
µ cd
If=10mA
+
PIN 1
47.70
E
C
D
DP
2.54*4=10.16
φ0.50
59.80
INTERNAL CIRCUIT DIAGRAM
1, 5
1, 5
A B C D E F G DP
7 6 4 3 2 9 10 8
A B C D E F G DP
7 6 4 3 2 9 10 8
PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25^oC AMBIENT)
Part No.
Chip
Raw
Material
Emitted
Color
Wave ^{Absolute Maximum Ratings}
Electro-optical Data(at 10mA)
C.C
or
Length ^{∆λ Pd If}
If
Vf (V)
If Iv (µcd)
C.A
(Peak) Per Segment (Rec) Per Segment
λρ (nm) _{(nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ.}
KW1-2302A3 _{GaAsP/GaP Hi-Eff. Red}
635 45 100 50 100 6.8 8.0 10 10-20 2000 6000
KW1-2302AS
KW1-2302A2
KW1-2302AG
GaAlAs
GaP
GaP
Super Red
660
Common
Green
565
Anode
Super Green
570
20 100 50 100 6.4 7.5 8.0 10-20 12000 42000
30 100 50 100 6.8 8.4 10 10-20 1800 5400
30 100 50 100 6.8 8.4 10 10-20 2000 5700
KW1-2302A6 _GaAsP/GaP
Yellow
585 30 100 50 100 6.8 8.4 10 10-20 1800 5400
KW1-2302C3 _{GaAsP/GaP Hi-Eff Red}
635 45 100 50 100 6.8 8.0 10 10-20 2000 6000
KW1-2302CS
KW1-2302C2
KW1-2302CG
GaAlAs
GaP
GaP
Super Red
660
Common
Green
565
Cathode
Super Green
570
20 100 50 100 6.4 7.5 8.0 10-20 12000 42000
30 100 50 100 6.8 8.4 10 10-20 1800 5400
30 100 50 100 6.8 8.4 10 10-20 2000 5700
KW1-2302C6 _GaAsP/GaP
Yellow
585 30 100 50 100 6.8 8.4 10 10-20 1800 5400
REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments.
2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve.
3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).