KW1-1501 Datasheet, PDF (1/1 Pages) Lucky Light Electronic – LED Numeric Display Single Digit (1.50")

KW1-1501 SERIES
LED Numeric Display
Single Digit (1.50")
DESCRIPTION:
The KW1-1501 series is large single digit display in 1.50 inch (38.00mm) height
with right DP designed for accurate readable displays need to be viewed over
a distance.
This series is suitable for use in instruments, digital readout displays.
All devices are available as either common anode or common cathode.
PACKAGE DIMENSIONS
21.00
8.0^o
3.40
A
ABSOLUTE MAXIMUM RATINGS: (Ta=25^oC)
Parameter
Max
Reverse Voltage per segment
5V
Reverse Current per segment (Vr = 5V)
100µA
Derating Linear from 25^oC per segment
0.4mA/ ^oC
Operating Temperature Range
-40^oC To 85^oC
Storage Temperature Range
-40^oC To 100^oC
Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260^oC
NOTES : 1. All dimensions are in millimeters (inches).
2. Tolerance is +0.25mm(0.010) unless otherwise specified.
3. Specifications are subject to change without notice.
4. NP: No Pin.
5. NC: No Connect.
TESTING CONDITION FOR EACH PARAMETER :
Parameter
Symbol Unit Test Condition
Forward Voltage
Vf
V
If=20mA
Peak Emission Wave Length
λρ
nm
If=20mA
Spectral Line Half-Width
∆λ
nm
If=20mA
Reverse Current
Ir
µA
Vr=5V
Average Luminous Intensity
Iv
µ cd
If=10mA
+
PIN 1
33.10
F
G
B
E
C
D
DP
2.54*4=10.16
INTERNAL CIRCUIT DIAGRAM
2, 6
φ0.50
40.64
2, 6
A B C D E F G DP
8 7 5 4 3 10 1 9
A B C D E F G DP
8 7 5 4 3 10 1 9
PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25^oC AMBIENT)
Part No.
Chip
Raw
Material
Emitted
Color
Wave ^{Absolute Maximum Ratings}
Electro-optical Data(at 10mA)
C.C
or
Length ^{∆λ Pd If}
If
Vf (V)
If Iv (µcd)
C.A
(Peak) Per Segment (Rec) Per Segment
λρ (nm) _{(nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ.}
KW1-1501A3 _{GaAsP/GaP Hi-Eff. Red}
635 45 100 50 100 3.4 3.8 5.2 10-20 1600 4200
KW1-1501AS
KW1-1501A2
KW1-1501AG
GaAlAs
GaP
GaP
Super Red
660
Common
Green
565
Anode
Super Green
570
20 100 50 100 3.0 3.8 5.2 10-20 10000 40000
30 100 50 100 3.4 4.4 5.2 10-20 1200 4000
30 100 50 100 3.4 4.4 5.2 10-20 1350 4500
KW1-1501A6 _GaAsP/GaP
Yellow
585 30 100 50 100 3.4 3.8 5.2 10-20 1200 3200
KW1-1501C3 _{GaAsP/GaP Hi-Eff Red}
635 45 100 50 100 3.4 3.8 5.2 10-20 1600 4200
KW1-1501CS
KW1-1501C2
KW1-1501CG
GaAlAs
GaP
GaP
Super Red
660
Common
Green
565
Cathode
Super Green
570
20 100 50 100 3.0 3.8 5.2 10-20 10000 40000
30 100 50 100 3.4 4.4 5.2 10-20 1200 4000
30 100 50 100 3.4 4.4 5.2 10-20 1350 4500
KW1-1501C6 _GaAsP/GaP
Yellow
585 30 100 50 100 3.4 3.8 5.2 10-20 1200 3200
REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments.
2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve.
3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).