|
KW1-1002 Datasheet, PDF (1/1 Pages) Lucky Light Electronic – LED Numeric Display Single Digit (1.00) | |||
|
KW1-1002 SERIES
LED Numeric Display
Single Digit (1.00")
DESCRIPTION:
The KW1-1002 series is large single digit display in 1.00 inch (25.40mm) height
with right DP designed for accurate readable displays need to be viewed over
a distance.
This series is suitable for use in instruments, digital readout displays.
All devices are available as either common anode or common cathode.
ABSOLUTE MAXIMUM RATINGS: (Ta=25oC)
Parameter
Max
Reverse Voltage per segment
5V
Reverse Current per segment (Vr = 5V)
100µA
Derating Linear from 25oC per segment
0.4mA/ oC
Operating Temperature Range
-40oC To 85oC
Storage Temperature Range
-40oC To 100oC
Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC
NOTES : 1. All dimensions are in millimeters (inches).
2. Tolerance is +0.25mm(0.010) unless otherwise specified.
3. Specifications are subject to change without notice.
4. NP: No Pin.
5. NC: No Connect.
TESTING CONDITION FOR EACH PARAMETER :
Parameter
Symbol Unit Test Condition
Forward Voltage
Vf
V
If=20mA
Peak Emission Wave Length
λÏ
nm
If=20mA
Spectral Line Half-Width
âλ
nm
If=20mA
Reverse Current
Ir
µA
Vr=5V
Average Luminous Intensity
Iv
µ cd
If=10mA
PACKAGE DIMENSIONS
15.00
8.0o
1.70
PIN 1
+
24.00
A
F
G
B
E
C
D
DP
2.54*4=10.16
Ï0.50
29.00
INTERNAL CIRCUIT DIAGRAM
3, 8
3, 8
A B C D E F G DP
7 6 4 2 1 9 10 5
A B C D E F G DP
7 6 4 2 1 9 10 5
PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25oC AMBIENT)
Part No.
Chip
Raw
Material
Emitted
Color
Wave Absolute Maximum Ratings
Electro-optical Data(at 10mA)
C.C
or
Length âλ Pd If
If
Vf (V)
If Iv (µcd)
C.A
(Peak) Per Segment (Rec) Per Segment
Î»Ï (nm) (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ.
KW1-1002A3 GaAsP/GaP Hi-Eff. Red
635 45 100 50 100 3.4 3.8 5.2 10-20 1600 4200
KW1-1002AS
KW1-1002A2
KW1-1002AG
GaAlAs
GaP
GaP
Super Red Common 660
Green
Anode
565
Super Green
570
20 100 50 100 3.0 3.8 5.2 10-20 5600 40000
30 100 50 100 3.4 4.4 5.2 10-20 1200 4000
30 100 50 100 3.4 4.4 5.2 10-20 1350 4500
KW1-1002A6 GaAsP/GaP
Yellow
585 30 100 50 100 3.4 3.8 5.2 10-20 1200 3200
KW1-1002C3 GaAsP/GaP Hi-Eff Red
635 45 100 50 100 3.4 3.8 5.2 10-20 1600 4200
KW1-1002CS
KW1-1002C2
KW1-1002CG
GaAlAs
GaP
GaP
Super Red
660
Common
Green
565
Cathode
Super Green
570
20 100 50 100 3.0 3.8 5.2 10-20 5600 40000
30 100 50 100 3.4 4.4 5.2 10-20 1200 4000
30 100 50 100 3.4 4.4 5.2 10-20 1350 4500
KW1-1002C6 GaAsP/GaP
Yellow
585 30 100 50 100 3.4 3.8 5.2 10-20 1200 3200
REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments.
2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve.
3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).
|