MMCU4 Datasheet, PDF (2/2 Pages) Laird Tech Smart Technology – Approvals and frequencies for worldwide deployment

CattronControl^™
MMCU4
TECHNICAL DATA AND SPECIFICATIONS
INTERFACES
ELECTRONIC DATA
No of I/O cards
up to 4
Output cards
Standard relay
16 relays per card,
5 A/250 V AC
Safety relay 8
1 Standard and 8 force-
guided safety relays,
5 A/250 V AC
Opto-coupler
16 per card,
up to 48 V/30 mA DC
Analog
4 channels per card
0-20 V DC, 0 - ±10 V DC
or 0/4-20 mA
Input card (feedback)
Baseboard
1 to 4 modules per card
Modules
DC digital: 4 per module,
12-36 V DC
AC digital: 4 per module,
90-140 V AC
Fieldbus cards
Profibus-DP, DeviceNet,
CANopen
EtherNet/IP, Modbus-TCP,
Profinet IO
STOP command
2 force-guided safety
relays
Digital circuitry
Dual-processor
technology
System addresses 24 bits =
16 million addresses
Hamming distance d=6 (Telegramm
verification) 16 bit CRC
Supply voltage
42/48, 115/230 V AC,
12/24 V DC (nominal)
Power
consumption
60 VA (nominal)
RF
Frequency range
335 MHz
406-418 Mhz
433-434 MHz
447-473 MHz
869 MHz
915-927 MHz
other frequencies
on request
Transmission speed 4.8 to 20 kbit/s
Transmitter
output power
1-500 mW
with various modules
(within permitted limits)
Modulation
FM
CONFIGURATION
Transkey™
System configuration,
address and RF channel
setting
Indication
8 Multi-LED for status and
diagnostics
RF channel spacing 12.5 kHz;
25.0 kHz and others
RF sensitivity
>107 dBm (nominal)
Antenna
External
MECHANICAL DATA
Weight
Maximum 6.2 kg (13.7 lbs)
Dimensions
LxWxH
320 x 255 x 185 mm
(12.6 x 10.04 x 7.2 inches)
Housing material Painted steel with hinged
door, Standard colour gray
Housing
IP 65 -
protection rating Suitable for outdoor use
Operating
temperature
-20º to +60º C
(-4º to +140º F)
Storage
temperature
-40º to +70º C
(-40º to +158º F)
STANDARDS
Safety
Shock
Vibration
EN 13849-1 Category
3 PL d
EN 60204-1 EN 60204-32
CE Compliant
EN 60068-2-27
EN 60068-2-6
ACCESSORIES
Antenna
Installation
External
4 Shock Absorbers
WACS_DS_MMCU4_102314
Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability
or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or
consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will
be furnished upon request. © Copyright 2014 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks
or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein
provides a license under any Laird or any third party intellectual property rights.