FGM Datasheet, PDF (2/2 Pages) Laird Tech Smart Technology – High power performance

Eccosorb® FGM
INSTRUCTIONS FOR USE
• To obtain low reflectivity, the absorber must be mounted on a metal surface.
• The material can be bonded by use of an RTV silicone based adhesive in conjunction with a
suitable primer. To obtain a strong bond, the metallic surface should be thoroughly cleaned
with a degreasing solvent.
• Eccosorb FGM can be readily cut with a sharp knife and template.
It is a very flexible material and conforms to contoured surfaces.
Typical Reflectivity
0
-5
-10
-15
-20
2
4
6
8
10
12
14
16
18
Frequency (GHz)
FGM-40
FGM-125
RFP-DS-FGM 092515
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the
end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or
2
consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird
Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be
the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.