EXCALIBUR Datasheet, PDF (2/2 Pages) Laird Tech Smart Technology – LEDs for status and feedback

CattronControl^™
Excalibur
TECHNICAL DATA AND SPECIFICATIONS
ELECTRONIC DATA
MECHANICAL DATA
Commands
Up to 5 dual-step drives,
horn, E-stop and optional
electronic A/B select switch
Weight 6-8
Dimensions 6-8
(L x W x H)
Approx. 290 g ( 0.64 lbs)
180 x 64 x 39 mm
(7.1 x 2.5 x 1.6 in)
Digital circuitry Dual-processor
technology
System
addresses
Energy-saving
mode
24 bits =
16 million addresses
Automatic shutdown
(configurable 0-30 minutes)
Supply voltage Rechargeable battery.
NiCd 3.6V/1500mAh
Autonomy
>12h at 100%
uninterrupted use
OPERATION AND INDICATION
Actuators ct24-ET/6 6 push buttons (2-step)
Actuators ct24-ET/8 8 push buttons (2-step)
Actuators ct24-ET/10
Actuators ct24-ET/12
Transkey™
10 push buttons (2-step)
12 push buttons (2-step)
System configuration,
address and RF channel
setting
Buzzer
Low voltage indication
LED
1 status LED
4 multi-function LEDs
STANDARDS
Weight 10-12
Approx. 350 g ( 0.77 lbs)
Dimensions 10-12 235 x 64 x 39 mm
(L x W x H)
(9.3 x 2.5 x 1.6 in)
Housing
material
High-impact polymer
and rubber
Housing
IP 65 -
protection rating Suitable for outdoor use
Operating
temperature
-20º to +60º C
(-4º to +140º F)
Vibration
and shock
Vibration/impact and drop
tested to 1m on concrete
RF
Frequency
range
Transmission
speed
Transmitter
output power
335 MHz
406-419 MHz
433-434 MHz
447-473 MHz
869 MHz
902-927 MHz
other frequencies on request
4.8 to 20 kbit/s
1-10 mW with
various modules
(within permitted limits)
Safety
EN 13849-1 Category 3 PL d
EN 60204-1
EN 60204-32
CE Compliant
Modulation
RF channel
spacing
Antenna
FM
12.5 kHz; 25 kHz
and others
Internal
ACCESSORIES
Batteries
Battery charger
2x Rechargeable batteries
3.6V/1500 mAh
Processor-controlled charger
incl. adapter cradle, charging
system on the primary side
for international use
Labeling
Self-adhesive marking labels
WACS-DS-EXCALIBUR_102314
Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability
or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or
consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will
be furnished upon request. © Copyright 2014 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks
or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides
a license under any Laird or any third party intellectual property rights.