ET19 Datasheet, PDF (2/2 Pages) Laird Tech Smart Technology – Reliable solid state operation

OptoTEC^TM Series ET19,23,F1N,0608
Thermoelectric Module
PERFORMANCE CURVES
80 70 60 50 40 30 20 10
Delta T (C)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0
1.9 A
1.5 A
1.2 A
0.8 A
0.4 A
80 70 60 50 40 30 20 10
Delta T (C)
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0
MECHANICAL DRAWING
Ceramic Material Aluminum Nitride Ceramics
Solder Construction: 232°C SnSb
OPERATING TIPS
• Max operating temperature: 80°C
• Do not exceed Imax or Vmax when
operating module
• Reference assembly guidelines for
recommended installation
• Solder tinning also available on
metallized ceramics
THR-DS-ET19,23,F1N,0608,11,W2.25 110414
Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of
Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses.Laird makes no warranties as to the fitness, merchantability or suitability of any Laird
materials or products for any specific or general uses.Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind.All
Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request.© Copyright 2014 Laird
Technologies, Inc.All Rights Reserved.Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company
thereof.Other product or service names may be the property of third parties.Nothing herein provides a license under any Laird or any third party intellectual property rights.