CCM12 Datasheet, PDF (2/2 Pages) Laird Tech Smart Technology – Operates in many radio frequencies for worldwide deployment

CattronControl^™
CCM12
TECHNICAL DATA AND SPECIFICATIONS
ELECTRONIC DATA
MECHANICAL DATA
Protection
Reverse polarity, load dumps
and electrical transients
Digital circuitry Dual-processor technology
System
addresses
24 bits =
16 million addresses
Hamming
distance
d=6
(Telegram verification)
Supply voltage 6-36 V DC
Dimension/
weight
122 x 144 x 48 mm
(4.8 x 5.7 x 1.9 inches)
395g (0.87 lbs)
Housing
material
Plastic, colour black
Housing
IP 66
protection rating
Operating
temperature
-20º to +60º C
(-4º to +140º F)
OPERATION AND INDICATION
Outputs
STOP command
2 forced-guided safety
relays 4 A /125 V AC
Dual CAN-bus interfaces complying with
ISO 11898-2
Optional with vehicle bus standard SAE J1939
Transkey™
System configuration,
address and RF channel
setting
LED
5 multi-function LEDs
CAN INTERFACE
Storage
temperature
Vibration
and shock
RF
Frequency
range
Transmission
speed
-40º to +70º C
(-4º to +155º F)
Vibration/impact and
shock tested
335 MHz
406-419 MHz
433-434 MHz
447-473 MHz
869 MHz
902-927 MHz
other frequencies on request
4.8 to 20 kbit/s
CAN format
BUS speed
CAN 2.0A and CAN 2.08
10,20,50, 125, 250, 500,
800 and 1000 kbps
Receive
sensitivity
Modulation
-107 dBm
FM
Standard
Protection
Connector
Communication
profile
ISO 11898-2, optional
support of SAE, 1939
vehicle bus standard
Exceeds ISO 11898-2
Bus fault protection
(-27 to +40V)
Transient voltage
(-200 to + 200V)
24 way micro-pack
male connector
D5 301 V4.02
RF channel
spacing
Antenna
12.5 kHz; 25 kHz and others
External
TNC-jack or RP-TNC-jack
STANDARDS
Safety
EN 13849-1 Category 3 PLd
EN 60204-1
EN 60204-32
CE Compliant
ISO 7637-2 EMC road vehicles
ISO 15998 Functional safety,
earth moving machinery
WACS-DS-CCM12_102314
Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability
or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or
consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will
be furnished upon request. © Copyright 2014 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered
trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license
under any Laird or any third party intellectual property rights.