780 Datasheet, PDF (2/2 Pages) Laird Tech Smart Technology – Heat sink preheating not required

Tpcm^TM 780
Phase Change Material
PROPERTIES
Color
Thickness, inches (mm)
Tpcm^TM 780
Grey
0.008” (0.203), 0.010” (0.254)
0.016” (0.406), 0.025” (0.635)
Thickness Tolerance, inches (mm)
Construction & Composition
Specific Gravity, g/cc
Phase Change Softening Range, °C
Thermal Conductivity, W/mK
± 0.0008” (0.0203), ± 0.0010” (0.0254)
± 0.0016” (0.0406), ± 0.0025” (0.0635)
Non-reinforced Film
2.48
~45°C to 70°C
5.4
Hardness (Shore 00)
Thermal Resistance
70°C, 345 kPa, °C-cm²/W (50 psi, °C-in²/W)
Outgassing TML
Outgassing CVCM
85
3 sec @ 21 C
0.025 (0.004)
0.51%
0.20%
TEST METHOD
Visual
Helium Pycnometer
Hot Disk Thermal
Constants Analyzer
ASTM D2240
ASTM D5470 (modified)
ASTM E595
ASTM E595
Bond Line Thickness Vs Pressure at 70°C
Pressure (psi)
Pressure (psi)
Thermal Resistance Vs Pressure
Pressure (psi)
Pressure (psi)
THR-DS-TPCM-780 0613
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the
fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages
of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request.
© Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technolo-
gies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party
intellectual property rights. Document A15585-00 Rev C 06/2013