700 Datasheet, PDF (2/2 Pages) Microsemi Corporation – RECTIFIERS ASSEMBLIES THREE PHASE BRIDGES, 2.5 AMP, STANDARD AND FAST RECOVERY

Tflex^™ 700 Series
Thermal Gap Filler
Construction
Color
Thermal Conductivity (W/mK)
Hardness (Shore 00)
Specific Gravity
Thickness Range
Thickness Tolerance
UL Flammability Rating
Temperature Range
Volume Resistivity (ohm-cm)
Outgassing TML
Outgassing CVCM
Tflex™ 700
Filled Silicone Sheet
Dark Grey
5.0
66; 3
1.73
0.020” - .200” (0.5 - 5.0mm)
±10%
94 V0
-45°C to 200°C
1 x 10¹³
1.0%
0.13%
TEST METHOD
N/A
Visual
Hot Disk™
ASTM D2240
Helium Pyncometer
File E180840
See reliability report
ASTM D257
ASTM E595
ASTM E595
STANDARD THICKNESSES
Standard thickness 0.020” (0.5mm) through 0.200” (5.0mm)
available in 0.010” (0.25mm) increments.
MATERIAL NAME AND THICKNESS
Tflex™ - indicates elastomeric gap filler product line.
7XXX - indicates Tflex™ 700 product line and thickness in mils (0.001-inches).
-DC1 - one side tacky; default is both sides tacky.
Data for design engineer guidance only. Observed performance varies in application.
Engineers are reminded to test the material in application.
THR-DS-TFLEX-700_07_2_14
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility
for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies
makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be
liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from
time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo,
and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of
third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. A15955-00 Rev E, 7/2014.