SDC-EC25N Datasheet, PDF (15/17 Pages) Laird Tech Smart Technology – Preliminary version of the EC25N HIG

SDC-EC25N
Hardware Integration Guide
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Industry Canada
User’s Guide Requirements
As outlined in the Operational Description, the SDC-EC25N complies with Industry Canada (IC) rules for a
Limited Modular Approval. To leverage Summit’s grant, the two conditions below must be met for the host
device into which the SDC-EC25N is integrated:
1. The antenna is installed with 20 cm maintained between the antenna and users.
2. The transmitter module is not co-located with any other transmitter or antenna that is capable of
simultaneous operation.
As long as the two conditions above are met, further transmitter testing is typically not required. However,
the OEM integrator is still responsible for testing its end-product for any additional compliance requirements
required with this module installed, such as (but not limited to) digital device emissions and PC peripheral
requirements.
IMPORTANT!
In the event that the two conditions above cannot be met (for example certain device
configurations or co-location with another transmitter), then the IC authorization is no
longer considered valid and the IC ID cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end
product (including the transmitter) and obtaining a separate IC authorization.
When using Summit’s IC grant for the SDC-EC25N, the integrator must include specific information in the
user’s guide for the device into which the SDC-EC25N is integrated. The integrator must not provide
information to the end user regarding how to install or remove this RF module in the user’s manual of the
device into which the SDC-EC25N is integrated. In addition to the required FCC statements outlined above,
the following IC statements must be added in their entirety and without modification into a prominent place
in the user’s guide for the device into which the SDC-EC25N is integrated:
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors is subject to licensing.
European Union
User’s Guide Requirements
The integrator must include specific information in the user’s guide for the device into which the SDC-EC25N
is integrated. In addition to the required FCC and IC statements outlined above, the following R&TTE
statements must be added in their entirety and without modification into a prominent place in the user’s
guide for the device into which the SDC-EC25N is integrated:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following
test methods have been applied in order to prove presumption of conformity with the essential
requirements of the R&TTE Directive 1999/5/EC:
 EN60950-1:2001 A11:2004
Safety of Information Technology Equipment
 EN 300 328 V1.7.1: (2006-10)
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
15
© Copyright 2015 Laird. All Rights Reserved
Americas: [phone]
Europe: [phone]
Hong Kong: [phone]