Y1505 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Available in gold or black (B) anodized finish

Y(B)1505
Directional Yagi Antenna
Heavy-Duty Mounting
Kit Included
GOLD ANODIZED YAGI ANTENNAINSURES LONG-TERM PERFORMANCE
Laird's premium series Directional Yagi antennas are fully gold anodized for corrosion resistance.
Our engineering staff has also optimized the product family for forward gain by computer
analysis and then field-tested each for conformance.
FEATURES
• Every Yagi is tuned on a network analyzer
• All Yagi antennas ship complete with a high
quality cast aluminum mounting kit that
includes stainless steel hardware and allows
vertical or horizontal orientation during
installation. (VHF models require light
assembly)
• Available in gold or black (B) anodized finish
S
• Point to point directional and multiple
point to omnidirectional outdoor antennas
applications used by private organizations
and government agencies around the globe.
• Typical applications include transportation such
as railroad switching, remote locations
reporting examples that include oil fields and
weather conditions and meter data
transmissions for utilities.
MECHANICAL SPECIFICATIONS
Material
Aluminum
Length
72"
Height
39.5"
Boom Diameter
1.25"
Weight
6 lbs
Rated Wind Velocity
150mph (241kph)
Equivalent Flat Area
0.9102 sq. ft.
Cable
None
Termination
N-Female connector
Color
Gold or Black Anodized
Lightning Protection
Lightning Arrestor
LABH350NN (Sold Separately)
Mounting
Heavy duty gold cast
(Kit included as
shown)
ELECTRICAL SPECIFICATIONS
Frequency Range
150 – 174 MHz (Tunable)
VSWR
< 2:1
Return Loss
-10dB max
Nominal Gain
9.2 dBd
Front to Back Ratio
20 dB
Maximum Power
300 W
Nominal Impedance
Ω50
Polarization
Vertical or Horizontal
Pattern
Directional
Horizontal Beamwidth
60°
(For Horizontal Polarization)
Vertical Beamwidth
54°
(For Vertical Polarization)
Tuning
Transmitting/Receiving
See cut chart
Both
Americas: +1.847 839.6907
[e-mail]
Europe: +44.1628.858941
[e-mail]
Asia: +86.21.5855.0827.127
[e-mail]
www.lairdtech.com
Normalized to 9.2 dBd
Normalized to 9.2 dBd
Vertical-to-Vertical Polarization
Azimuthal Pattern (Y, Z, or E-plane)
Horizontal-to-Horizontal Polarization
Azimuthal Pattern (Y, Z, or H-plane)
ANT-DS-Y(B)1505_0115
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or
suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold
pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved. Laird,
Laird Technologies, the Laird Logo, and other marks are trade marks or registered trade marks of Laird Inc. or an affiliate company thereof. Other product or service names may be the
property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.