SQUINT Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – High quality etched copper circuitry

Squint
Cellular Patch Antenna
HIGH PERFORMANCE, LOW PROFILE CEILING MOUNT ANTENNA
The omni-directional “Squint” cellular patch antenna was engineered with a 3.5 dBi dipole like
pattern shape and ceiling mount feature which provides an extremely low profile for minimum
visual impact. The radiation pattern has a 55 degree beamwidth with the maximum directed at 45
degrees from the horizontal plane. This compact design provides system engineers with an
aesthetically pleasing antenna solution to build out seamless microcellular and picocellular cell sites
quickly and efficiently. Superior electrical performance is achieved because of the high quality
etched copper circuitry which substantially improves cellular service quality, decreasing both
interference and lost calls.
s
• Low profile
• 2.5dBi gain at the horizon
• Superior electrical perfomance
• High quality etched copper circuitry
s
• Industrial and educational complexes
• Healthcare centers and office buildings
• Shopping malls
• Transportation centers
MODEL
SQ8243P12NF
Frequency (MHz) 824-896 MHz
Impededance (Ohms) 50 Ohms
VSWR
1:5:1
Polarization
Linear
Gain
3.5 dBi
Beamwidth, E-Plane Peak at 45°
RF Connector (f)
N-Female
Weight lb. (kg)
1.8 lb, .82 kg
Mounting
Surface
Dimensions in.(cm) 10” x 10” x 1-1/2”
(25.4x25.4x3.8 cm)
SQ8803P12NF
880-960 MHz
50 Ohms
1:5:1
Linear
3.5 dBi
Peak at 45°
N-Female
1.7 lb, .76 kg
Surface
10” x 10” x 1-1/2”
(25.4x25.4x3.8 cm)
SQ8963P12NF
896-940 MHz
50 Ohms
1:5:1
Linear
3.5 dBi
Peak at 45°
N-Female
1.7 lb, .76 kg
Surface
10” x 10” x 1-1/2”
(25.4x25.4x3.8 cm)
SQ9023P12NF
902-928 MHz
50 Ohms
1:5:1
Linear
3.5 dBi
Peak at 45°
N-Female
1.7 lb, .76 kg
Surface
10” x 10” x 1-1/2”
(25.4x25.4x3.8 cm)
0
-5
-10
-15
-20
Americas: +1.847 839.6925
IAS‐[e-mail]
Europe: +44.1628.858941
IAS‐[e-mail]
Asia: +86.21.5855.0827.127
IAS‐[e-mail]
www.lairdtech.com
H-Plane
E-Plane
ANT-DS-SQUINT 1115
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or
suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold
pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved. Laird,
Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Inc. or an affiliate company thereof. Other product or service names may be the
property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.