SQ24493P Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Neutral color and diminutive profile

SQ24493P
Dual Band Squint Antenna
DUAL BAND, OMNIDIRECTIONAL SQUINT ANTENNA
Laird Technologies new dual band omnidirectional squint antenna allows the customer
to install one antenna system and continue to use that one antenna system regardless
of the 802.11 mode of operation or frequency band. Your customer can install and use
the antenna system for 802.11b or g service today and can continue to use the antenna
to support an 802.11a system if they deploy one at some later date. Customers deploying
an 802.11b or g system might intend keeping those systems functioning while also deploying
an 802.11a system, can deploy some number of them for b/g and at some later date deploy
them for 802.11a. They can mix and match as they deploy while maintaining the same
aesthetic approach for all of their antennas.
Pattern shapes are uniform and symmetrical providing high levels of signal density into defined
coverage zones, an important feature for high data rate, high capacity environments such as
offices. Standard cable length is 36 inches and the standard connector is the reverse polarity
TNC. However other coax length and connector alternatives are available as well.
FEATURES
• 802.11 A/B/g and wide band frequency coverage
• Variety of cable lengths and connectors available
• Neutral color and diminutive profile
MARKETS
• WiMAX
PARAMETER
Frequency (GHz)
Gain (dBd)
VSWR
Polarization
Beamwidth E-Plane
Azimuth Beamwidth
RF connector (m)
Dimensions (in)
Mount
Pigtail (in.)
Enclosure
Power (Watts)
Weight (Antenna Only) lb (kg)
SQ24493P
2.4 - 2.5 & 4.90 - 5.99
3 dBi (nominal)
2:1
Vertical Linear
56º
Omnidirectional
SMA
4 x 4 x 0.875
Ceiling
12
UB Stable / ASA
10
0.26 (0.11)
Americas: +1.847 839.6925
[e-mail]
Europe: +44.1628.858941
[e-mail]
Asia:
[e-mail]
Middle East & Affrica: +44.1628.858941
[e-mail]
www.lairdtech.com
ANT-DS-SQ24493P 0317
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials rests with the end
user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies
materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the
Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird
Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be
the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.