SP6 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Lightning protection for antenna systems

SP6
COAXIAL SURGE PROTECTORS
COAXIAL SURGE PROTECTORS
DC to 6 GHz Operation
The SP6 surge protectors offered by Laird are an integral part of any antenna installation
involving the protection of sensitive equipment from surges caused by lightning. The ultra
fast discharge design gives quick response to power surges and dumps the excess power
safely to ground. Grounding is accomplished via a ground lug terminal or N bulkhead
connector. The units have the ability to withstand multiple lightning strikes. The SP6
passes DC voltage so it is also suitable for those systems which pass DC power through the
coax such as remote amplifiers. Construction is all plated brass to resist corrosion.
FEATURES
• Ultra fast gas discharge < 1KV / usec
• 0.2 dB @ 2.4 GHz,
.4 dB @ 5 GHz max insertion loss
• VSWR better than 1.4:1
• Rugged, lightweight and waterproof
• Bulkhead mount N female connector
APPLICATIONS
• Lightning protection for antenna systems
• 900 MHz, 2.4 GHz @ 5 GHz WLAN systems
• WiMAX
PARAMETER
Frequency Range
Insertion Loss
VSWR
DC Breakdown Voltage
Impulse Breakdown
Voltage (1 KV/uS MAX)
Impulse Wave Discharge (5 times)
Impedance
Insulation Resistance (100 V)
Imput Power
Operating Temperature
Weight
Dimensions (incl connectors)
MIN
DC
.1
1.1 : 1
TYP
2400
.2
1.2 : 1
230
MAX
6000
.4
1.4 : 1
700
10000
50
50
100
-40
+85
4.5 (130)
2.4 x 1.2 x 0.9 (60 x 31 x 23)
UNITS
MHz
dB
V
V
A
OHM
Meg Ohm
W
°C
oz (g)
in (mm)
SYSTEM ORDERING:
SP6-230-BFF DC to 6 GHz, bulkhead N female to N female, 230 V surge
protector SP6-230-BFM DC to 6 GHz, bulkhead N female to N male, 230 V
surge protector
NOTES:
•All shipments F.O.B. Schaumburg, IL 60173
Americas: +1.847 839.6907
[e-mail]
Europe: +44.1628.858941
[e-mail]
Asia: +86.21.5855.0827.127
[e-mail]
www.lairdtech.com
ANT-DS-SP6_0115
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility
for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as
to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or
consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will
be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trade marks or registered
trade marks of Laird Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license
under any Laird or any third party intellectual property rights.