S24517PT Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Designed specifically to support 802.11n networks

S24517PT
MIMO Sector Antenna
3X3 ELEMENT DUAL-BAND PANEL ANTENNA
Laird's S24517PT is a dual-band, directional sector antenna for use in 802.11n MIMO applications.
Enclosed in a low-profile radome, the antenna is mounted using the included articulating mount.
The mount can be affixed to a mast or anchored directly to a vertical surface.
Each of the three MIMO antenna elements are connected to the WLAN Access Point via a low loss,
plenum-rated, coax pigtail. The radiation patterns are uniform and symmetrical, providing high-level
signal density into defined coverage zones. This antenna will greatly enhance the performance of
802.11n systems. The dual-band frequency coverage means that a single type of antenna can be
deployed with any MIMO radio in the 2.4-2.5 GHz and 5.1-5.9 GHz bands.
FEATURES
• Low profile housing
• Performance optimized using Laird's
proprietary RF optimization tools
• Designed specifically to support 802.11n networks
• Various connector and coax lengths options available
MARKETS
• Hospital
• Campus
• Research Institute
• Public safety wireless systems
• Transport Terminals
PARAMETER
Frequency (MHz)
Gain (dBi)
E-Plane (3 dB beamwidth)
H-Plane (3 dB beamwidth)
Polarization
VSWR
Cable Lenght in. (mm)
RF connector
Power (watts)
Radome
Dimensions in. (mm)
Weight (kg)
Wind Surface Area
Wind survival
Operational temperature (Cº )
Mount style (articulating)
Water / dust seal rating
SPECIFICATION
2400 - 2500, 5150 - 5875
8 @ 2450 MHz, 10.7 @ 5500 MHz
75º @ 2.45 GHz / 55º @ 5.5 GHz
70º @ 2.45 GHz / 60º @ 5.5 GHz
Linear, 2 Vertical, 1 Horizontal
2.0:1
36” (914) Plenum rated (other lenghts available)
Reverse SMA (3x)
1
Polycarbonate
10.2 x 10.2 x 1.3 (259.1 x 259.1 x 33.5)
1.8
@ 0º, 0.0067m² / @ 90º, 0.009m²
200 km/h
-30º to +65º
Wall / mast
IP-67
Americas: +1.847 839.6907
[e-mail]
Europe: +44.1628.858941
[e-mail]
Asia: +86.21.5855.0827.127
[e-mail]
www.lairdtech.com
Laird warrants to the original end user customer of its products that its products are free from defects in material and
workmanship. Subject to conditions and limitations Laird will, at its option, either repair or replace any part of its products
that prove defective by reason of improper workmanship or materials. This limited warranty is in force for the useful
lifetime of the original end product into which the Laird product is installed. Useful lifetime of the original end product may
vary but is not to exceed five (5) years from the original date of the end product purchase.
ANT-DS-S24517PT 0915
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or
suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold
pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved. Laird,
Laird Technologies, the Laird Logo, and other marks are trade marks or registered trade marks of Laird Inc. or an affiliate company thereof. Other product or service names may be the
property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.