POE-PS-150-001 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – FCC and CE approved

Innovative Technology
for a Connected World
POE-PS-150-001
Power-Over-Ethernet
Passive Splitter
GENERAL PURPOSE POE PASSIVE SPLITTER
General purpose POE passive splitters take the power supplied from a POE power supply and split off the data and DC power
into separate connectors. These splitters are mainly used for powering devices which do not support Power over Ethernet
The Laird Technologies POE Passive Splitter is applicable for a wide range of network products such as access points, routers,
IP cameras, modems, switches, embedded computers, and other network devices.
FEATURES
• Passive splitter
• FCC and CE approved
• Compatible with IEE 802.3af routers
including Cisco and Netgear
INPUT
Power-Hub RJ45 Input Socket (per channel) data
and Power-Connected to DTE RJ-45 Input (Data & Power)
PIN
SYMBOL
DESCRIPTION
1
RX+
Data Receive
2
RX-
Data Receive
3
TX+
Data Transmit
4
Vin +
Feeding power(+)
5
Vin+
Feeding power(+)
6
TX-
Data Transmit
7
Vin-
Feeding power(-)
8
VIn-
Feeding power(-)
MARKETS
• Remote routers, access points and bridges
• Remote networking equipment
• SOHO equipment
• IP camera and phone systems
• VOIP systems
• WiMAX
OUTPUT
Power-Hub RJ45 Output Socket (per channel)
data and Power-Connected to DTE
PIN
SYMBOL
DESCRIPTION
1
RX+
Data Receive
2
RX-
Data Receive
3
TX+
Data Transmit
4
NC
NC
5
NC
NC
6
TX-
Data Transmit
7
NC
NC
8
NC
NC
Note: Two Power-hub port should not be connected together, in order to prevent ground loops.
2.3 DC Power Plug Diameter : 5.5 mm x 2.1 mm x 11 mm ±0.3 mm
Supply of polarity : Inside is (+) , Outside is (-)
SPECIFICATIONS
Operation Temperature
Storage Temperature
Operation Humidity
Cooling
Size
Cable length
-0 - +70°
-65 - +85°
5% - 90% 45°
Free air cooling
RJ 45 socket 28 x 16 x 23 mm (L x W x H)
150 mm
global solutions: local support TM
Americas: +1.847 839.6907
[e-mail]
Europe: +1.32.80.7866.12
[e-mail]
Asia: +1.65.6.243.8022
[e-mail]
www.lairdtech.com
ANT-DS-POE-PS-150-001 0611
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of
Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability
or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies
products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2011 Laird Technologies, Inc. All
Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product
or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.