|
POE-HP-XXI Datasheet, PDF (1/2 Pages) Laird Tech Smart Technology – Minimum cross talk and insertion loss | |||
|
POE-HP-xxi
Power-Over-Ethernet Power
Supply/Inserter
âCARRIER CLASSâ POWER OVER ETHERNET SYSTEM
The POE-HP-xxi is an advanced 802.3af compliant power supply/inserter. The power supply is
autoranging on the input and has a regulated voltage output and it has overload and short
circuit protection. The POE-HP-xxi is not a proprietary unit. It will function with any equipment
which is compliant with the IEEE 802.3af POE standards. The POE-HP-xxi does not include the
intelligent detection algorithms detailed in the 802.3af spec which means that the POE-HP-xxi will
power up any device connected to it. The power is supplied on ethernet pins 4/5 (V+) and
7/8 (V-). The POE-HP-xxi comes complete with a standard North American 115 VAC power cord.
International cords are available upon request.
Using power over Ethernet to power remote devices has several advantages including;
⢠The power supply can be centrally located where it can be attached to an
uninterruptible power supply.
⢠The user has the ability to easily power on and reset the attached equipment
from a remote location.
⢠There is no need to run additional power cabling to the device as power can
be supplied over the CAT5 ethernet cable.
⢠The power supply can power a remote device up to 300 feet away,
limited only by the Ethernet standard.
FEATURES
⢠High power (50W) output
⢠Auto ranging power supply / inserter
⢠Overload and short circuit protection
⢠Minimum cross talk and insertion loss
⢠Advanced switching technology â runs cool
⢠Complies with IEEE 802.3af POE standard
MARKETS
⢠Remote routers, access points,
and bridges
⢠Remote networking equipment
⢠Remote camera systems
⢠400 MHz to 10 GHz systems
⢠SOHO equipment
⢠IP phone systems
⢠WiMAX
Americas: +1.847 839.6907
IAS-AmericasEastSales@lairdtech.com
Europe: +44.1628.858941
IAS-EUSales@lairdtech.com
Asia: +86.21.5855.0827.127
IAS-AsiaSales@lairdtech.com
www.lairdtech.com
|
▷ |