OC24519 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – ASSEMBLY AND INSTALLATION

31.8±0.5
357.2±2.3
376.8±2.3
OC24519
2.4-2.5 GHz, 5.25-5.925 GHz
38.1±0.5
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
SPECIFICATIONS
PARAMETER
PERFORMANCE
Model Number
OC24519
Frequency
2400-2500 MHz/
5250-5925 MHz
Gain
7.5 dBi / 9 dBi
Polarization
Linear, vertical
VSWR
2.40-2.500 GHz: ≤ 1.5:1
5.25-5.700 GHz: ≤ 1.8:1
5.70-5.850 GHz: ≤ 1.5:1
5.85-5.925 GHz: ≤ 2.0:1
E-Plane 3 dB Beamwidth
22º / 11º
H-Plane 3 dB
Omnidirectional
RF Connector
Type N, fixed (male or female)
Power
1 Watt
Weight
Radome
Operational Temperature
Storage Temperature
Mounting
Dimensions (mm)
0.20 Kg
Polycarbonate, UV, white
-30ºC to +70ºC
-40ºC to +85ºC
Connector fixed, upright and inverted
orientation
31.8 diameter x 376.8 length
Warranty and Liability
Laird Technologies warrants to the original purchaser that antenna products will
remain free from defects in materials and workmanship for a period of twelve
(12) months from the purchase date. If any such defect is discovered with in the
warranty period, Laird Technologies will at its sole option, repair or replace the
Product free of charge upon its return to the factory. This warranty applies only
if the Product is used in a normal fashion, and is void if the Product is abused,
disassembled, tampered with, used unreasonably, or fails as a result of normal
wear. Furthermore, this warranty applies only to defects, which occur where the
proper Product is selected as recommended by Laird Technologies and is used in
the fashion recommended by Laird Technologies for the defective Product. THIS
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND
IS LIMITED TO A PERIOD OF TWELVE(12) MONTHS FROM THE DATE OF ORIGINAL
PURCHASE. LAIRD IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY KIND. ANY WARRANTY EXTENDED HEREIN SHALL BE LIMITED TO THE
PRICE PAID TO LAIRD FOR THE DEFECTIVE PRODUCT. WHERE STATE OR LOCAL
LAW GOVERNS THE PERIOD OF WARRANTY, SUCH PERIOD SHALL CONTROL
Americas: +1.847 839.6907
[e-mail]
Europe: +1.32.80.7866.12
[e-mail]
Asia: +1.65.6.243.8022
[e-mail]
www.lairdtech.com
Please read all instructions carefully before attempting to install
and use this product.
SAFETY
The antennas and all associated equipment should be installed
in accordance with all applicable local and national electrical
code guidelines to ensure safe operation.
APPLICATION
The OC24519 is a 2.4-2.5/5.25-5.925 GHz dual-band
omnidirectional collinear array especially designed to
compliment interior or exterior mounted wireless network
systems. The integrated male or female N-connector is
imbedded in the antenna base cap for direct AP mounting.
Sealing permits either upright or inverted orientation in outdoor
locations. The antenna may also be pole-mounted when
separation from the AP is required for optimum positioning.
LOCATION
For best results, mount the antenna and the associated AP unit
near ceiling level or above exterior obstructions in a location
near the center of the coverage area. A line-of-sight path
between the antenna and active locations works best. Although
frequency signals penetrate cubical dividers, partitions and
interior walls with little attenuation, reinforced block walls,
metal surfaces and steel shelving may attenuate signals or
cause multipath, a condition where reflected signals interfere
with the primary signal path. Avoid mounting next to a
column or vertical support that could create a “shadow zone”
of coverage to one portion of the room.
MOUNTING
The antenna mounts directly to a connector on the unit itself.
165-00131_AA