NCE250 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Non-conductive

NCE250^P1age
Silicone Elastomer
NON-CONDUCTIVE SILICONE ELASTOMER
NCE250 is non-conductive silicone elastomer. This material can be extruded and co-extrude
with conductive elastomers. It’s designed for outdoor sealing applications which might be
exposed at extreme environment.
FEATURES
• Non-conductive
• Provides stronger environmental shielding to
the outside of gaskets due to pure silicone
• Cost-effective solution
• Able to extrude in various sizes and profiles
MARKETS
• Data-Com
• Medical
• Industrial
Parameter
Color
Elastomer type
Filler type
Density
Mechanical Properties
Hardness - Shore A
Tensile Strength
Elongation
Tear Strength
Compression Set
Temperature Range (min)
Temperature Range (max)
UL Flammability Rating
Test Method
Visual Inspection
Formulation
None
ASTM D792
ASTM D2240
ASTM D412
ASTM D412
ASTM D624, die C
ASTM D395
ASTM D1329
MIL-DTL-83528C (4.5.15)
UL94 between Al plates
Typical Value
Orange
Silicone Resin
–
1.2 ± 0.25 g/cm3
Shore A, 60 ± 7
800 psi, minimum
200%, minimum
60 ppi, minimum
10%, maximum
-45°C
150°C
V0 pending
Information on the product described is based on laboratory test data which Laird believes to be
reliable. It is recommended that each user make their own tests to determine the suitability of
Laird’s products for their application.
USA: +1.866.928.8181
Europe: +49.0.8031.2460.0
Asia: +86.755.2714.1166
www.lairdtech.com
EMI-DS-NCE250 041715
Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests
with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or
general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird
Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird
Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third
parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.