MF-PPS Datasheet, PDF (1/2 Pages) Laird Tech Smart Technology – Passes UL94 V0 testing

ECCOSORB® MF-PPS
Thermoplastic, Injection Moldable Absorber
HIGH TEMPERATURE, MAGNETICALLY LOADED ABSORBER
Rigid, magnetically loaded, injection moldable load absorber. Typically used as attenuators
and terminations in microwave transmission lines such as for waveguide, coaxial or stripline
applications. Other applications include phase shifters in phased array antennas and board
level absorber covers that result in EMI reduction through combination of absorption and
shielding. Available in two grades or loading levels: MF-PPS-120 and MF-PPS-124. These
grades pass UL94 V0 requirements.
FEATURES AND BENEFITS
• Thermoplastic polymer amenable to
injection molding processes
• Injection molding is ideal for complex
shapes and high volume applications -
results in lower part cost
• High service temperature of polymer is
amenable to solder reflow processes
• Environmentally friendly and meets
RoHs and REACH requirement
• Passes UL94 V0 testing
• Low outgassing - < 1.00% TML and
<0.10% CVCM
MARKETS
• Telecom infrastructure and
wireless networks
• Satellite communications
• Automotive radar
• Military electronics
• Industrial instrumentation
• Medical
TYPICAL PROPERTIES
Density (g/cc)
Tensile Strength (psi)
Hardness (Shore D)
Max Service Temperature (°C)
Surface Resistivity (Ohm/Square)
Water Absorption (%)
Thermal Conductivity (W/m-K)
Dielectric Breakdown (Volt/mil)
ECCOSORB MF-PPS
4.48-4.66
8,000
92
210
10¹¹
<0.01%
1.2
6.2
Americas: +1.866.928.8181
Europe: +49.(0).8031.2460.0
Asia: +86.755.2714.1166
www.lairdtech.com