LT1110 Datasheet, PDF (1/2 Pages) Linear Technology – Micropower DC-DC Converter Adjustable and Fixed 5V, 12V

Innovative Technology
for a Connected World
global solutions: local support TM
USA: +1.800.492.2320
Europe: +44.1628.858.940
Asia: +852.2268.6567
[e-mail]
www.lairdtech.com/wireless
915 MHz Wireless Module
LT1110
THE FASTEST WAY TO WIRELESS
Laird Technologies’ third generation 915 MHz FHSS module sets yet another standard for industrial RF
communication. Based on proprietary FlexRF™ technology, this globally-accepted module will exceed
most OEM application and performance requirements.
Embedded with Laird Technologies’ robust server-client protocol, the LT1110 permits an unlimited number
of clients to synchronize to a single server for low latency communications. The server and all clients
in a network can communicate with any radio in range via either addressed or broadcast packets. The
configuration and test software allows OEMs to design and test networks to suit their applications.
From the OEM integrator’s point of view, the LT1110’s interface (API, configuration, etc) is 100%
compatible with the LT2510 allowing the OEM to choose either 915 MHz or 2.4 GHz. The enhanced
API commands provide packet routing control and network intelligence. With its field-proven proprietary
FHSS RF protocol and increased penetration at 915 MHz, the LT1110 rejects RF noise, excels in multipath
scenarios, allows for co-located systems, and provides an extremely reliable communication link.
The LT1110 achieves RF data rates up to three times faster than our previous generation 915 MHz
transceivers. Two output power levels are available, a low power module with 8 dBm conducted output
power and a high power with 23 dBm conducted output power. Line of sight communication up to ½
mile and 2 miles respectively, is possible while consuming as little as 32 mA of current in full transmit
mode! It also comes with a modular approval allowing higher gain antennae to greatly increase the
effective range. At the same time, a range of ultra-low power modes make the LT1110 your best solution
for power-restrictive or battery-operated applications.
The mini SMT package is well-suited for space-constrained designs and has the same pin-out and
mechanical form factor as the 2.4 GHz LT2510 module. It is available in pick-and-place packaging for
volume manufacturing. A pluggable version with two single row headers is offered for ease of integration.
FEATURES
• Very robust in the presence
of interference
• 915 MHz for improved
RF penetration
• High throughput
• Ultra-low power consumption
• Long range capability
• Miniature SMT form factor
• Integrated battery monitor,
temperature sensor, GPIOs
and ADC
• Simple integration
MARKETS
• Commercial buildings
• Field surveillance
• Utility management
• Recreation
• Fleet telemetry