IN24-5RD Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Improved detent for better position stability

Innovative Technology
for a Connected World
“Rubber Duck” Omni Antenna
IN24-5RD
2.4 GHz APXtender “Rubber Duck” Antenna
The 5.5 dBi APXtender indoor rubber duck omnidirectional antenna is used to extend the range of indoor
access points or client bridges in 802.11 2.4GHz wireless LAN environments. The antenna features a 360°
horizontal transmission pattern and a 50° vertical transmission pattern. The transmit/receive element can be
tilted in relation to the base to direct signal where it is needed (0°, 45°, 90°). The antennas are available in
various connectors to fit most wireless radio equipment.
FEATURES and benefits
• 5 .5 dBi gain 2.4 GHz omnidirectional
indoor antenna
• Direct replacement for 2.2 dBi rubber duck
antenna that is standard on most indoor access
points and bridges
• Extends range of 2.4 GHz wireless access points or
wireless bridges
• Improved detent for better position stability
• Improved more rugged construction
• Improved more flexible radome
• Improved temperature operation range to 70°C
• Improved styling
SPECIFICATIONS
Parameter
Frequency range
Gain
VSWR
Impedance
Input power
Operating temperature
Weight
2400 - 2485 MHz
5.5 dBi
1.5:1
50 ohm
10 watts
-10° to +70°C
1.2 oz (34 g)
Dimension (Height x Dia)
8.07” x 0.57”D
(205 mm x 14.5 mm D)
markets
• 2.4 GHz wireless access points
• 2.4 GHz wireless routers
• 2.4 GHz wireless client bridges
• 2.4 GHz wireless equipment
Antenna Patterns
90
180
270
E-Plane
System ORDERING
IN24-5RD-SMA 5.5 dBi 2.4 GHz APXtender – SMA Male Connector
IN24-5RD-RSMA 5.5 dBi 2.4 GHz APXtender – Reverse Polarity SMA Connector (Dlink, smartBridges, etc)
IN24-5RD-RTNC 5.5 dBi 2.4 GHz APXtender – Reverse Polarity TNC Connector (Linksys, Cisco, etc)
global solutions: local support TM
Americas: +1.847 839.6907
[e-mail]
Europe: +1.32.80.7866.12
[e-mail]
Asia: +1.65.6.243.8022
[e-mail]
www.lairdtech.com
ANT-DS-IN24-5RD 0711
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non-infringement of any Laird Technologies
materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the
Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird
Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be
the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.