IF850 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – 850MHz MicroSphere Antenna

IF850
850MHz MicroSphere Antenna
850MHZ OMNI-DIRECTIONAL IN-BUILDING ANTENNA
The widespread use of cellular phones and wireless network applications inside buildings has
increased the need for antenna systems that can provide considerable gain over traditional dipole
antennas. Laird's in-building wireless antennas are particularly applicable in environments where
aesthetics and wide angle coverage are necessary for successful wireless deployment. Their
surprisingly small size allow the antennas to be hidden almost anywhere, providing an invisible
solution for most applications.
FEATURES
• Surprisingly small size allows it to be hidden almost
anywhere, providing an invisible solution for many
applications.
• The field pattern is toroidal, providing omni-
directional coverage in any plane around the long
axis of the antenna, and two lobes in any plane
parallel to the long axis.
MARKETS
• The omni-directional pattern is suited to a
variety of uses, including handheld devices, in-
building systems or other applications where
mobility is a factor.
Americas: +1.847 839.6907
[e-mail]
Europe: +44.1628.858941
[e-mail]
Asia: +86.21.5855.0827.127
[e-mail]
www.lairdtech.com
Azimuth Plane
Cut perpendicular to the antenna,
parallel to the connector/cable
exit, perpendicular to the
polarization
Elevation Plane
Cut perpendicular to the antenna,
parallel to the connector/cable exit,
parallel to the polarization axis
SPECIFICATIONS
Omni Plane
Cut in the plane of the antenna
perpendicular to the connector/
cable exit
Element Type
Frequency Range
Peak Gain
Polarization¹
Impedance
Maximum Input Power
VSWR (Min. Performance)
Dimensions (L x W x H)
Housing
Operating/Storage Temperature
Microstrip
806 – 960 MHz
3 dBi
Linear
50 ohms
50 watts
2:1
11.4 x 8.6 x 0.25 cm
Acrylic
C
MODEL #
IF850-SF00
REFERENCE #
CAF95952
CONNECTOR
SMA Female Panel
MOUNTING OPTIONS
• Includes nylon screws for mounting to ceiling tile or finished ceiling
ANT-DS-IF850 0115
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or
suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold
pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved. Laird,
Laird Technologies, the Laird Logo, and other marks are trade marks or registered trade marks of Laird Inc. or an affiliate company thereof. Other product or service names may be the
property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.