IF450 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – 450 MHz MicroSphere Antenna

s
Azimuth Plane
Cut perpendicular to the antenna,
parallel to the connector/cable exit,
perpendicular to the polarization
Elevation Plane
Cut perpendicular to the antenna,
parallel to the connector/cable exit,
parallel to the polarization axis
450 MHz MicroSphere Antenna
IF450
a
The widespread use of cellular phones and wireless network applications inside buildings has increased the
need for antenna systems that can provide considerable gain over traditional dipole antennas.
Laird's in-building wireless antennas are particularly applicable in environments where aesthetics and wide
angle coverage are necessary for successful wireless deployment. Their surprisingly small size allow the
antennas to be hidden almost anywhere, providing an invisible solution for most applications.
s
s
• Surprisingly small size allows it to be hidden almost anywhere, ^{• The UHF band antenna is a good solution for stealth}
providing an invisible solution for many applications.
in-building public safety systems.
• The field pattern is toroidal, providing omni-directional
coverage in any plane around the long axis of the antenna,
and two lobes in any plane parallel to the long axis.
s
Element Type
Frequency Range
Peak Gain
Polarization
Impedance
Maximum Input Power
VSWR
Dimensions (L x W x H)
Housing
Operating/Storage Temperature
Microstrip
410-520 MHz (UHF)
3 dBi
Linear
50 ohms
10 watts
2:1 Typical across the band
13 x 14.7 x .25 cm
Acrylic
C
MODEL #
REFERENCE #
CONNECTOR
IF450-SF00
CAF94350
SMA Female Panel
s
• Includes nylon screws for mounting to ceiling tile or finished ceiling
Omni Plane
Cut in the plane of the antenna
perpendicular to the connector/cable exit
Americas: +1.847 839.6907
IAS‐[e-mail]
Europe: +44.1628.858941
IAS‐[e-mail]
Asia: +86.21.5855.0827.127
IAS‐[e-mail]
www.lairdtech.com
ANT-DS-IF450 0615
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or
suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold
pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved. Laird,
Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Inc. or an affiliate company thereof. Other product or service names may be the
property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.