HCR8065M Datasheet, PDF (1/2 Pages) Laird Tech Smart Technology – Conformance to RoHS

Americas: +1.847 839.6925
[e-mail]
Europe: +44.1628.858941
[e-mail]
Asia: [e-mail]
www.lairdtech.com
806-960 MHz/1710-2200 MHz
Rotatable Shell Omni-Directional Antenna
HCR8065M
THE HCR ROTATABLE SHELL OMNIDIRECTIONAL ANTENNA –
WHEN HIGH PERFORMANCE IS DESIRED & EXTREME RUGGEDNESS
& LOW PROFILE IS REQUIRED.
The HCR Rotatable Shell Omnidirectional Antenna is a tough low-profile antenna for outdoor or
indoor applications. This antenna provides frequency agility, low visibility, wide bandwidth and a
low angle radiation pattern that is superior to traditional gain antennas in most applications.
The HCR Rotatable Shell Omnidirectional Antenna is available in various industry standard mounting
configurations including a threaded permanent stud mount model for vandal resistant mounting on
brackets, panels, ceilings or any other kind of housing.
FEATURES AND BENEFITS
0B
 Multi-band operation: 806-960 MHz /
1710-2200 MHz
 Meets IP67 protection rating for dust tight
seal and temporary water immersion.
 Permanent mount provides vandal resistant
protection for remote installations.
 Conformance to RoHS
MARKETS
1B
 Security / Public Safety
 Commercial & Industrial- M2M
 Transportation
 Electric, Gas, & Water Utilities
 Retail, Consumer & Home
 Fixed Radio Applications
SPECIFICATIONS
Model
Frequency
Gain (Typical)
Gain (Max)
VSWR (2′ x 2 ′ ground plane)
Max Input Power
Radiation Pattern
Polarization
Normal Impedance
Antenna Dimension (“)
Antenna Color
Weight (lbs)
Wind Survival (mph)
Mounting
Operating Temperature
Storage Temperature
Ingression Protection
RoHS Compliance
HCR8065M3NBL-001
HCR8065M3PBL-001
HCR8065M3NBN-001
HCR8065M3PBN-001
806-960 MHz
HCR8065M3NWL-001
HCR8065M3PWL-001
HCR8065M3NWN-001
HCR8065M3PWN-001
1710-2200 MHz
2.1 dBi
2.6 dBi
2.2 dBi
3.2 dBi
< 2:1
10 watts
Omnidirectional
Vertical
50 Ohm
83.3 H x 36.5 D mm (3.47 x 1.4 )
Black / White
NM0: 106 g (0.23) P-Mount: 192.5 g (0.42)
282 km/h (175 )
NMO / P-Mount
-30° C to 70° C
-40° C to 85° C
IP67
Yes
HCR8065M3NBL-001 NMO mount black w/Logo
HCR8065M3PBL-001 P mount black w/logo
HCR8065M3NBN-001 NMO mount black no logo
HCR8065M3PBN-001 P mount black no logo
HCR8065M3NWL-001 NMO mount white w/logo
HCR8065M3PWL-001 P mount white w/logo
HCR8065M3PBN-001 NMO mount white no logo
HCR8065M3PWN-001 P mount white no logo
Laird warrants to the original end user customer of its products that its products are free from defects in material and
workmanship. Subject to conditions and limitations Laird will, at its option, either repair or replace any part of its products
that prove defective by reason of improper workmanship or materials. This limited warranty is in force for the useful
lifetime of the original end product into which the Laird product is installed. Useful lifetime of the original end product may
vary but is not to exceed five (5) years from the original date of the end product purchase.