FG4700 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Custom tuning available

FIBERGLASS
OMNIDIRECTIONAL ANTENNAS
FG4700
Americas: +1.847 839.6907
[e-mail]
Europe: +1.32.80.7866.12
[e-mail]
Asia: +1.65.6.243.8022
[e-mail]
www.lairdtech.com
FIBERGLASS BASE STATION ANTENNAS FEATURE INDUSTRY-LEADING DESIGN
COMPONENTS THAT PERFORM IN EXTREME CONDITIONS
Laird Technolgies’ fiberglass base station antennas are collinear designs enclosed in a high density fiberglass,
which is covered with a protective ultraviolet inhibiting coating.
The radiating elements are made from high efficiency copper and are carefully phased to provide maximum gain in
the horizontal plane. The mounting sleeves are tuned to eliminate RF currents from the transmission line resulting
in a “cold” sleeve allowing great freedom in mounting. This high quality and well-focused beam provides the
highest gain and best efficiency.
FEATURES AND BENEFITS:
• E very FG fiberglass base antenna is tested on a network
analyzer before shipping to assure the best performance.
• Special UV Treated - stands up to the sun
• D urable gold anodized sleeve and cap with
N Female connector
• Custom tuning available
• FedEx / UPS Shippable
APPLICATIONS:
• O mnidirectional (circular) outdoor antenna
applications used by private organizations
and government agencies around the globe.
• Typical applications include land based and
marine radio and data transmissions for public
safety agencies, commercial organizations, and
the military.
Electrical
Frequency Range
Bandwidth
Nominal Gain
Maximum Power
Nominal Impedance
Polarization
Pattern
Half-Power Beamwidth
(Elevation° x Azimuth°)
Lightning Protection
Termination
470 – 490 MHz
20 MHz, VSRW < 1.5:1
36 MHz, VSRW < 2:1
0 dBd
200 W
50 Ω
Vertical
Omnidirectional
70° x 360°
DC Ground
N Female connector
Elevation Pattern (Y, Z, or H-plane)
Mechanical
Height
Diameter
Weight
Rated Wind Velocity
Rated Wind Velocity
(with 0.5” radial ice)
Equivalent Flat Plate Area
Mounting Information
20”
1 – 3/8”
.85 lbs
125 mph (210 kph)
85 mph (137 kph)
0.2274 sq. ft.
FM2 Mounting Kit
(Sold separately)
Azimuthal Pattern (Y, Z, or E-plane)
ANT-DS-FG4700 0913
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of
Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability
or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies
products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2009 Laird Technologies, Inc. All
Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product
or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.