EXS Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Available in various standard connectors

EXS
Two-Way Radio Antenna
FEATURES
• Injection molded 1/4 wave helical ‘slim mini’
antenna
• High durability, high efficiency
• Textured finish with strain-relief base
• Available in various standard connectors
• An original ‘Tuf Duck’ antenna
arameter
Frequency
Polarization
Nominal Impedance
VSWR
Power Rating
Temperature Range
Drop Test
SPECIFICATION
VHF Trunking / Cellular
Vertical
50 ohms
1.5:1 max at resonance
50 watts
-40°C to +85°C
1M
ors
PART# FREQUENCY BAND CONNECTORS
th
EXS118 118-127 MHz
V
5.1”
EXS127 127-136 MHz
V
3.62” - 4.4”
EXS136 136-144 MHz
V
3.62” - 4.4”
EXS144 144-148 MHz
V
3.55” - 4.45”
EXS150 150-162 MHz
V
3.5” - 4.39”
EXS155 155-164 MHz
V
3.45” - 4.2”
EXS161 161-174 MHz
MXI & SMI
3.5”
EXS164 164-174 MHz
V
3.3” - 3.95”
EXP902 806-866 MHz
SF & TN
-
The EXS model antenna is available in the following frequencies and connectors. Order by antenna model, frequency
and connector. For example: EXS150MX. Length of each antenna will vary according to the connector chosen.
Americas: +1.847 839.6925
[e-mail]
Europe: +44.1628.858941
[e-mail]
Asia:
[e-mail]
Middle East & Affrica: +44.1628.858941
[e-mail]
www.lairdtech.com
ANT-DS-EXS 1216
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials
rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or
suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind.
All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request.
© Copyright 2016 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of
Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird
Technologies or any third party intellectual property rights.