EXH Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Two-Way Radio Antenna

EXH
Two-Way Radio Antenna
FEATURES
• Injection molded ¼ wave base loaded
antenna
• High gain
• High durability, high efficiency
• Textured finish with strain-relief base
• Available in various standard connectors
• An original ‘Tuf Duck’ antenna
arameter
SPECIFICATION
Frequency Range
VHF
Nominal Impedance 50 ohms
VSWR
2:1 max at resonance
Power Raiting
Max Power - 50 watts
Temperature Range -40°C to +85°C
Drop Test
1M
Length¹
10.50 inches
1 _{The length noted is the maximum possible length for this LMR}
antenna. ^{The actual length of the antenna will vary according to the}
connector chosen.
ors
PART#
EXH150
EXH155
EXH160
FREQUENCY BAND
145-155 MHz
150-160 MHz
155-165 MHz
CONNECTORS
BN, KR, MX, SF, SFU, SM, SMV & TN
BN, KR, MD, MX, SF, SFU, SM, SMV & TN
BN, KR, MX, SF, SFU, SM, SMV & TN
EXH170 165-175 MHz
BN, KR, MD, MX, SF, SFU, SM, SMV & TN
COLOR CODE
Red
Brown
Black
Orange
The EXH model antenna is available in the above frequencies and connectors. Order by antenna model, frequency
and connector. For example: EXH150SF. Specifications subject to change without notice.
Americas: +1.847 839.6925
[e-mail]
Europe: +44.1628.858941
[e-mail]
Asia:
[e-mail]
Middle East & Affrica: +44.1628.858941
[e-mail]
www.lairdtech.com
ANT-DS-EXH 1216
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials
rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or
suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind.
All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request.
© Copyright 2016 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of
Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird
Technologies or any third party intellectual property rights.