ESP-100-POE Datasheet, PDF (1/2 Pages) Laird Tech Smart Technology – Complies with IEC 61643-21 standard

ESP-100-POE
Network Lightning/Surge Protector
7.5V/70V CLAMP VOLTAGE SURGE PROTECTOR
The ESP series of surge protectors are rugged and effective surge protectors for Ethernet based systems. They
provide a high level of protection against power surges caused by lightning and other causes. These surge
protectors are used to protect expensive equipment from damage caused by electrical surges. They should be
mounted as close to the protected equipment as possible. The all metal cast aluminum enclosure and shielded
RJ45 connectors provide for good EMI noise suppression. The integral mounting feet can be screwed to a metal
chassis to provide proper grounding or as an alternative, there is an integral ground wire provided which can be
connected to a ground for those systems that require a single point ground connection. They are designed to be
used indoors or outdoors, if inside a waterproof enclosure. The ESP series are compatible with 100Mbps data
and 48V POE systems. Protection is provided on all 8 ethernet pins (7.5V clamping on Data pins 1,2,3,6 and 70V
clamping on POE pins 4,5,7,8).
FEATURES
 100Mbps data rate
 Compatible with 48V power over ethernet
systems
 7.5V Data / 70V POE clamping voltage
 5KA surge discharge current
 CAT6 and CAT5e compatible. All 8 pins
protected.
 Integral mounting feet and separate
ground wire
 Shielded RJ45 jacks and metal enclosure
for EMI noise suppression
 Complies with IEC 61643-21 standard
 802.3at compliant
 Compact and rugged design
MARKETS
• Routers, access points and bridges
• Wimax systems
• Remote networking equipment
• Point of sale systems
• SOHO equipment
• IP phone systems
• Industrial control systems
• IP camera systems
Americas: +1.847 839.6925
[e-mail]
Europe: +44.1628.858941
[e-mail]
Asia:
[e-mail]
Middle East & Affrica: +44.1628.858941
[e-mail]
www.lairdtech.com