ECE126 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Retains strong EMI protection

EcE126
Fluorosilicone Elastomer with Silver-Glass
PRELIMINARY
SILVER ALUMINUM FILLED FLUOROSILICONE ELASTOMER
EcE126 is a Silver-coated Aluminum filled fluorosilicone elastomer that meets the MIL-DTL 83528
Type D specifications. This material can be Molded, Extruded, or formed into sheets and then Die
Cut. See our catalog for standard shapes that might be available to test, or provide information about
your needs for a custom profile.
FEATURES
• Utilizes both conductive and
non-conductive materials
• Fluorosilicone Polymer base resin extends the
temperature range and improves standard
environmental resistance to include resistance
to some chemicals, fuels, and lubricants
• Retains strong EMI protection
• Cost-effective solution
• Able to extrude or mold in various standard
sizes, standard shapes, and standard profiles
without a tooling charge
MARKETS
• DataCom
• Military
• Medical
SPECIFICATIONS
Color
Elastomer
Filler
Hardness
Volume Resistivity
Density
Tensile Strength
Elongation
100%-300%
Temperature Range
TARGET SPECIFICATION
Tan
Fluorosilicone
Silver Aluminum
70 ± 7 Shore A
0.010 ohm-cm, maximum
2.0 ± 0.25 g/cm³
200 psi, minimum
60%-260%
35 ppi, minimum
-55°C to 160°C
USA: +1.866.928.8181
Europe: +49.0.8031.2460.0
Asia: +86.755.2714.1166
www.lairdtech.com
EMI-DS-ECE126 1013
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of
Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non-infringement of any Laird Technologies materials or products
for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’
Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2012 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird
Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties.
Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.