ECE116 Datasheet, PDF (1/1 Pages) Laird Tech Smart Technology – Retains strong EMI protection

EcE116
Silicone Elastomer
SILVER ALUMINUM FILLED SILICONE ELASTOMER
EcE116 is a Silver-coated Aluminum filled silicone elastomer that meets the MIL-DTL 83528 Type B
specifications. This material can be Molded, Extruded, or formed into sheets and then Die Cut. See our
catalog for standard shapes that might be available to test, or provide information about your needs for a
custom profile.
FEATURES
• Utilizes both conductive and
non-conductive materials
• Provides stronger environmental shielding
to the outside of gaskets due to pure silicone
• Retains strong EMI protection
• Cost-effective solution
• Able to extrude in various sizes and profiles
MARKETS
• DataCom
• Military
• Medical
SPECIFICATIONS
Color
Elastomer
Filler
Hardness
Volume Resistivity
Density
Tensile Strength
Elongation
100%-300%
Temperature Range
TARGET SPECIFICATION
Tan
Silicone
Silver Aluminum
65 ± 7 Shore A
0.008 ohm-cm, maximum
2.0 ± 0.25 g/cm³
200 psi, minimum
100%-300%
30 ppi, minimum
-55°C to 160°C
USA: +1.866.928.8181
Europe: +49.0.8031.2460.0
Asia: +86.755.2714.1166
www.lairdtech.com
EMI-DS-ECE116 041715
Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability
or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or
consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will
be furnished upon request. © Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered
trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under
any Laird or any third party intellectual property rights.