CR500 Datasheet, PDF (1/2 Pages) Laird Tech Smart Technology – Low outgassing

Eccosorb®CR500
High Temperature, Two-Part Castable Load Absorber
HIGH TEMPERATURE TWO PART CASTABLE LOAD ABSORBER
Eccosorb CR500 is a castable resin series that, when fully cured, will duplicate the physical
and electrical properties of its counterpart in the Eccosorb® MF500 series. For example,
Eccosorb® CR500-117 is the equivalent to Eccosorb® MF500-117.
Frequency range from 1 - 18 GHz. Low out-gassing properties for space applications.
FEATURES AND BENEFITS
• High temperature
• Low outgassing
MARKETS
• Commercial Telecom
• Security and Defense
SPECIFICATIONS
TYPICAL PROPERTIES
Service Temperature °C (°F)*
Density (g/cc)
Outgassing*
(%TML) (cured CR500-124)
(%CVCM) (cured CR500-124)
ECCOSORB CR500
<260 (<500)
1.6 to 4.6
.163
.074
Data for design engineer guidance only. Observed performance varies in application.Engineers are
reminded to test the material in application.
*Eccosorb CR500 can be used for short periods at 260°C ( 500°F) permitting use at high power levels.
Exposure to high temperatures should be limited. Slow change in physical and electrical properties
occurs at temperatures above about 177°C (350°F).
* * Outgassing data per ASTM E595-07; criteria for acceptability is 1.00% TML and 0.10% CVCM.
APPLICATIONS
• Eccosorb CR500 can be used to mold waveguide terminations, attenuators, and loads to
size.
AVAILABILITY
• Eccosorb CR500 is available in six castable versions, CR500-110, CR500-112, CR500-114,
CR500-116, CR500-117 & CR500-124.
• Eccosorb CR500 is supplied as a two-part system consisting of a Component X and
Component Y in 2 pound (quart) and 5 pound (gallon) kits.
• Shelf life is approximately 6 months when stored unmixed in a well sealed container at
temperatures no higher than 25°C (77 °F).
Americas: +1.866.928.8181
Europe: +49.(0)8031.2460.0
Asia: +86.755.2714.1166
www.lairdtech.com