CL2510 Datasheet, PDF (1/2 Pages) Laird Tech Smart Technology – Standard Male DB-9 DCE serial interface

Innovative Technology
for a Connected World
2.4 GHz Wireless Serial Product
CL2510
THE FASTEST WAY TO WIRELESS
Based on Laird Technologies’ fifth generation 2.4GHz FHSS module, the LT2510,
the CL2510 product sets the standard for industrial RF communication. Available with a
RS-232 DB-9 connector and housed in a rugged enclosure, the CL2510 is an ideal choice
for wireless serial communications in industrial applications. As a wireless serial bridge
the CL2510 can replace thousands of feet of cable.
Optimized for point-to-point or point-to-multipoint networks and embedded with Laird
Technologies’ robust server-client protocol, the CL2510 permits an unlimited number of
clients to synchronize to a single server for low latency communications. The server and
all clients in a network can communicate with any radio in range via either addressed or
broadcast packets. A simple to use Windows Configuration Utility allows customers to
easily configure and test the transceivers.
With its field-proven FHSS air interface protocol, the CL2510 rejects RF noise, excels in
multipath scenarios, allows for co-located systems, and provides an extremely reliable
communication link. It also provides a more robust, but simpler, link than ZigBee for RF
applications that do not require a mesh topology.
With a throughput of up to 280 Kb/s, CL2510 delivers speedy data rates. In addition,
variable output power options (up to +17 dBm) enable communication over distances
that aren’t achievable with competing technologies. The radio sustains a standard
asynchronous serial data stream between two or more radios out of the box.
global solutions: local support TM
USA: +1.800.492.2320
Europe: +44.1628.858.940
Asia: +852.2268.6567
[e-mail]
www.lairdtech.com/wireless
FEATURES
Easy to Use
• Standard Male DB-9 DCE serial interface
• Standard baud rates supported from 1200 to 230,400 bps
• RF Data rates of 280kbps or 500kbps, selectable
• Advanced configuration using AT Commands
Networking and Security
• Retries and Acknowledgements
• API Commands for advanced packet addressing
• Frequency Hopping Spread Spectrum for security and interference rejection
• Customizable RF Channel, System ID and Vendor ID
• Automatic Link Synchronization
• Low Latency and high throughput