MMUN2111RLT1 Datasheet, PDF (1/7 Pages) Leshan Radio Company – Bias Resistor Transistor

LESHAN RADIO COMPANY, LTD.
Bias Resistor Transistor
PNP Silicon Surface Mount Transistor with
Monolithic Bias Resistor Network
This new series of digital transistors is designed to replace a single device and its
external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transis-
tor with a monolithic bias network consisting of two resistors; a series base resistor and a
base-emitter resistor.The BRT eliminates these individual components by integrating them
into a single device. The use of a BRT can reduce both system cost and board space. The
device is housed in the SOT-23 package which is
designed for low power surface mount applications.
∗ Simplifies Circuit Design
∗ Reduces Board Space
∗ Reduces Component Count
∗ The SOT-23 package can be soldered using wave or
reflow. The modified gull-winged leads absorb thermal
stress during soldering eliminating the possibility of
damage to the die.
∗ Available in 8 mm embossed tape and reel. Use the
Device Number to order the 7 inch/3000 unit reel.
Replace “T1” with “T3” in the Device Number to order
the 13 inch/10,000 unit reel
MMUN2111RLT1
MMUN2112RLT1
MMUN2113RLT1
MMUN2114RLT1
MMUN2115RLT1
MMUN2116RLT1
MMUN2130RLT1
MMUN2131RLT1
MMUN2132RLT1
MMUN2133RLT1
MMUN2134RLT1
PNP SILICON
BIAS RESISTOR
TRANSISTOR
PIN1
base
(Input)
R1
R2
PIN3
Collector
(output)
PIN2
Emitter
(Ground)
3
1
2
CASE 318–08, STYLE 6
SOT– 23 (TO–236AB)
MAXIMUM RATINGS (T _A = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Collector-Base Voltage
Collector-Emitter Voltage
Collector Current
Total Power Dissipation @ T _A = 25°C ⁽¹⁾
Derate above 25°C
V_CBO
V _CEO
I_C
P_D
50
Vdc
50
Vdc
100
mAdc
200
mW
1.6
mW/°C
THERMAL CHARACTERISTICS
Rating
Symbol
Value
Unit
Thermal Resistance — Junction-to-Ambient (surface mounted)
Operating and Storage Temperature Range
Maximum Temperature for Soldering Purposes
Time in Solder Bath
R _{θ JA}
T _J , T _stg
T_L
625
–65 to +150
260
10
°C/W
°C
°C
Sec
DEVICE MARKING AND RESISTOR VALUES
Device
Marking
R1 (K)
R2 (K)
MMUN2111LT1
A6A
10
10
MMUN2112LT1
A6B
22
22
MMUN2113LT1
A6C
47
47
MMUN2114LT1
A6D
10
47
MMUN2115LT1 ⁽²⁾
A6E
10
1. Device mounted on a FR-4 glass epoxy printed circuit board using the minimum recommended footprint.
2. New devices. Updated curves to follow in subsequent data sheets.
Q1–1/7