L74VHC1GT07 Datasheet, PDF (1/6 Pages) Leshan Radio Company – Noninverting Buffer withOpen Drain Output with LSTTL-Compatible Inputs

LESHAN RADIO COMPANY, LTD.
Noninverting Buffer with Open Drain Output
with LSTTL–Compatible Inputs
L74VHC1GT07
The L74VHC1G07 is an advanced high speed CMOS buffer with open drain output fabricated with silicon gate CMOS technology. It
achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining CMOS low power dissipation.
The internal circuit is composed of three stages, including an open drain output which provides the ability to set output switching level.
This allows the L74VHC1GT01 to be used to interface 5 V circuits to circuits of any voltage between V CC and 7 V using an external
resistor and power supply.
The device input is compatible with TTL–type input thresholds and the output has a full 5.0 V CMOS level output swing. The input
protection circuitry on this device allows overvoltage tolerance on the input, allowing the device to be used as a logic–level translator from
3.0 V CMOS logic to 5.0 V CMOS Logic or from 1.8 V CMOS logic to 3.0 V CMOS Logic while operating at the high–voltage power
supply.
The L74VHC1GT01 input structure provides protection when voltages up to 7 V are applied, regardless of the supply voltage. This
allows the L74VHC1GT01 to be used to interface 5 V circuits to 3 V circuits. The output structures also provide protection when
V CC = 0 V. These input and output structures help prevent device destruction caused by supply voltage – input/output voltage mismatch,
battery backup, hot insertion, etc.
• High Speed: t PD = 3.8 ns (Typ) at V CC = 5 V
• Low Internal Power Dissipation: I CC = 2 mA (Max) at T A = 25°C
• Power Down Protection Provided on Inputs
• Pin and Function Compatible with Other Standard Logic Families
• Chip Complexity: FET = 105; Equivalent Gate = 26
5
4
1
2
3
SC–88A / SOT–353/SC–70
DF SUFFIX
5
4
1
2
3
TSOP–5/SOT–23/SC–59
DT SUFFIX
PIN ASSIGNMENT
1
NC
2
IN A
3
GND
4
OUT Y
5
V CC
MARKING DIAGRAMS
V7^d
Pin 1
d = Date Code
Figure 1. Pinout (Top View)
V7^d
Figure 2. Logic Symbol
Pin 1
d = Date Code
FUNCTION TABLE
Inputs
A
L
H
Output
Y
L
Z
ORDERING INFORMATION
See detailed ordering and shipping information in the
package dimensions section on page 5of this data sheet.
1/6